Products

| Combination Atomizers and Spray Units >> Plastic 2ml~30ml

Plastic 2ml~30ml

Combination Spray Units

^{- PB-02 Plastic PP bottle(injection) 2ml + spray pump dosage: 0.035ml in snap-on version + PP overcap}

^{- PB-02M PP bottle(injection) 2ml + spray pump dosage: 0.035ml in snap-on version + UV coated PP overcap
- PB-02MM UV coated PP bottle(injection) 2ml + spray pump dosage: 0.035ml in snap-on version + UV coated PP overcap
- PB-02MJ UV coated PP bottle(injection) 2ml + spray pump dosage: 0.035ml in snap-on version + UV coated PP overcap with Jewels
- PB-02B PP bottle(injection) 2ml + spray pump dosage: 0.035ml in snap-on version + PP overcap with a stainless steel key ring
- PB-02BMM UV coated PP bottle(injection) 2ml + spray pump dosage: 0.035ml in snap-on version + UV coated PP overcap with a key ring
- PB-02E PCTA bottle(injection) 2ml + spray pump dosage: 0.035ml in snap-on version + PP overcap
- PB-02A PP bottle(injection) 2.5ml + spray pump dosage: 0.035ml in snap-on version without PP overcap}

^{- PB-02C Plastic PP square bottle(injection) 2ml + spray pump dosage: 0.035ml in snap-on version with PP square overcap}

Combination Atomizers and Spray Units Plastic 2ml~30ml

- Plastic PP bottles(injection) + spray pump 12/415 dosage: 0.035ml in screw version + PP overcap

- PB-04 4ml

- PB-04A 5ml

- PB-05 Plastic PP bottle(injection) 5ml + spray pump 11/410 ribbed dosage: 0.05ml in screw version + PP overcap

- PB-05C Plastic PP bottle(injection) 5ml + spray pump dia.12mm dosage: 0.12ml in snap-on version + PP overcap

- PB-06C Plastic PP bottle(injection) 6ml + spray pump dosage: 0.12ml in snap-on version + PP overcap

- PB-07 Plastic PP bottle(injection) 7ml + spray pump 14/415 dosage: 0.05ml in screw version + PP overcap

- PB-07C Plastic PP bottle(injection) 7ml + spray pump dosage: 0.12ml in snap-on version + PP overcap

- Plastic PP bottles(injection) + spray pump 14/410 dosage: 0.12ml in screw version + PP dustcap

- PB-10A 8ml

- PB-10 10ml

- PB-01 HDPE bottle(injection+blowing) 10ml + Spray Pump dosage: 0.07ml snap-on version+Actuator in snap in + PP overcap

the dimension: dia.17.8mmXheight 92mm

- PB-03 HDPE bottle(injection+blowing) 10ml + Crimp-on Spray Pump FMB-01 dia.13mm dosage: 0.07ml + PP overcap

the dimension: dia.17.8mmXheight 92mm

- PB-01D PP bottle(injection) 8ml + Spray Pump FMA-01 dosage: 0.05ml snap-on version+Actuator in snap in + PP dustcap

the dimension: dia.17.8mmXheight 92mm

- PB-12C PP bottle(blowing) 5ml + Cream Pump CR-01 dia.13mm dosage: 0.1ml snap-on + PP dustcap

the dimension: dia.15.5mmXheight 74mm

- PB-12S PP bottle(blowing) 5ml + Cream Pump CR-01 13/410 dosage: 0.1ml screw-on + PP dustcap

the dimension: dia.15.7mmXheight 73.5mm

- PB-12CA PP bottle(injection) 3ml + Cream Pump CR-01 dia.13mm dosage: 0.1ml snap-on + PP dustcap
the dimension: dia.15.7mmXheight 76mm
- PB-12SB PP bottle(injection) 3ml + Spray Pump FMA-01 dosage: 0.10ml snap-on version + PP overcap t
the dimension: dia.14.7mmXheight 81mm

- PB-01B PP bottles(injection) + Spray Pump snap-on version with a switch on/off sleeve dosage: 0.075ml

- PB-01B 7.5ml

the dimension: dia.19mmXheight 93.5mm

- PB-01BA 15ml

the dimension: dia.22.5mmXheight 111mm

- PB-01T PET bottles(injection+blowing) + Spray Pump dosage: 0.075ml,0.10ml snap-on version + PP dustcaps

- 8.5ml

the dimension: dia.17.5mmXheight 76.5mm

- 10ml

the dimension: dia.17.5mmXheight 87.7mm

- 12ml

the dimension: dia.17.5mmXheight 93.2mm

- PB-01C PET bottles(injection+blowing) + Cream Pump dosage: 0.2ml in Turn On/Off type snap-on version without caps

- 8.5ml

- 10ml

Combination Atomizers and Spray Units Plastic 2ml~30ml

- PB-08 PE bottle(injection+blowing) 22ml Neck in snap-on + Spray Pump dosage: 0.15ml,0.18ml snap-on + Actuator in snap in + PP overcap

- PB-09 PP bottle(injection) 20ml Neck in snap-on + Spray Pump dosage: 0.10ml,0.12ml snap-on + PP overcap
PB-09A PP bottle(injection) 20ml Neck in snap-on + Spray Pump dosage: 0.10ml,0.12ml snap-on + PP overcap

- PB-11 PP Tube(blowing) 10ml + Spray Pump dosage: 0.05ml in screw version 14/410 ribbed + PP overcap

Combination Atomizers and Spray Units Plastic 2ml~30ml

- PET bottles and PP bottles + Crimp-on Spray Pumps FMB-01(with plastic actuator) dia.15mm dosages: 0.07ml, 0.075ml, 0.08ml + Flip Top Cap in snap-on

- PB-07A PET bottle(injection+blowing) 15ml with flip top cap
- PB-07A PET bottle(injection+blowing) 20ml with flip top cap
- PB-07B PP bottle(blowing) 30ml with flip top cap
- PB-07 PET bottle(injection+blowing) 20ml with PP cap
- PB-07C PVC fancy bottle(injection+blowing) 35ml 17/400 dosage: 0.05ml

Combination Atomizers and Spray Units Plastic 2ml~30ml ^{- CS-15 Credit card sprayer 15ml with a flip top guard dosage:0.05ml}

the unit's dimension: width 46.5mmXthickness 10.6mmXheight 83mm

^{- CS-15A Credit card sprayer 18ml regular type dosage:0.05ml
the unit's dimension: width 55mmXthickness 11mmXheight 85.7mm

- CS-15B Credit card sprayer 20ml drawer type dosage:0.05ml
the unit's dimension: width 56mmXthickness 12.4mmXheight 87mm}

At a glanceCombination spray units from 2 ml to 35 ml where a PP, PCTA or PET bottle comes with a snap-on or screw pump and an overcap already matched. The 2 and 2.5 ml bodies run at 0.035 ml per stroke in plain PP, PCTA and UV coated PP, with overcaps that are plain, UV coated, jewelled or fitted with a stainless steel key ring, and the 5 ml bodies move up to 0.05 and 0.12 ml pumps on 11/410 and 12 mm snap-on. Units are packed assembled, so filling is the only step left on your line. Colour, plating and decoration are made to order. Send the volume and the finish and we will quote unit, pump and overcap as one.

Quality & complianceView ISO certifications, patents and FAQs for mini spray units.