Plastic, Glass & Perfume Bottles — Buyer FAQ
Answers below are based on the published information on Sunmart’s AI information page. Price and MOQ are quoted on request; specific figures are not published. Use the tags to jump to a topic or filter by product, or search the page.
- Glass Tubes+Pumps, Droppers, Caps — Glass Spray Tubes & Perfume Samplers | 1-60 ml
- Glass Bottles+Pumps,Droppers, Caps — Glass Bottles with Pumps & Droppers | DIN18 | 5-150 ml
- HDPE & PET Bottles — PET & HDPE Bottles with Overcaps | 24/416, 27/415
- PET Preform & Bottles — PET Bottles & Preforms | 20/415, 15/415, 18/415
- HDPE & PP Bottles — HDPE & PP Bottles | 17/415, 20/410, 24/410 | 15-473 ml
- Plastic Containers, Drops, Fans,Jars — Plastic Dropper Bottles & Jars | 3-60 ml HDPE
- Aluminium cans — Aluminium Aerosol Cans & Spray Bottles | 5-150 ml
- Syringes — Medical Syringe Manufacturer | Oral & Cosmetic | 1-10 ml
- Amber DIN18/PP28 — Amber Dropper Bottles | DIN18 & PP28 | 5-200 ml
- Amber G.P.I.400 PP~25 — Amber Glass Vials G.P.I. 400 | 14-480 ml
- Amber ISO/SPDA20 — Amber Glass Bottles ISO 20 mm Crimp Neck | 8-100 ml
- Blue/Green DIN18 — Blue & Green Glass Bottles DIN18 | 5-100 ml
- USP Type I,II,III — Glass Bottles - USP Type I, II, III Manufacturer
- 10ml ~ 30ml — Perfume Glass Bottles - 10ml ~ 30ml Manufacturer
- 35ml ~ 50ml — Perfume Glass Bottles - 35ml ~ 50ml Manufacturer
- 55ml ~ 80ml — Perfume Glass Bottles - 55ml ~ 80ml Manufacturer
- 85ml ~ 100ml — Perfume Glass Bottles - 85ml ~ 100ml Manufacturer
- Above 100ml — Perfume Glass Bottles - Above 100ml Manufacturer
109 question groups on this page.
Product Selection & Materials
What is HDPE, and why is it used for cosmetic bottles?
HDPE is high-density polyethylene: opaque, stiff and resistant to most cosmetics, which is why it is the usual material for a shampoo or lotion bottle. It cannot show the product colour, so it is chosen for protection rather than for looks. HDPE and PP bottles start from about 15 ml in screw-on or snap-on versions. Sunmart matches the resin to the formula and the neck to the pump.
Related products: HDPE & PP Bottles
What is the difference between amber and clear glass bottles?
Amber glass differs from clear glass in the light it blocks: amber filters short wavelengths, which is why essential oils and light-sensitive serums use it, while clear glass shows the product. The glass class then decides what it can hold — cosmetic glass, or USP Type I, II and III for pharmaceutical. Sunmart supplies both and matches the closure to the neck.
Related products: Glass Bottles+Pumps,Droppers, Caps · Amber DIN18/PP28 · Blue/Green DIN18
How is pharmaceutical glass classified?
A pharmaceutical glass bottle is classified by hydrolytic resistance: USP Type I borosilicate, Type II treated soda-lime and Type III soda-lime, and the class decides what the container may hold. Colour is usually amber for light-sensitive liquids, and the neck then takes a dropper, pump or cap. Sunmart supplies the class you specify and states it on the specification sheet.
Related products: Amber DIN18/PP28 · Amber G.P.I.400 PP~25 · Blue/Green DIN18
What is the practical difference between pharmaceutical glass classes?
The practical difference between pharmaceutical glass classes is what they release into the liquid: Type I is the most inert and is used for injectables and sensitive preparations, Type II is treated soda-lime, Type III is ordinary soda-lime for dry products. A bottle is chosen by the fill, not by the shape. Sunmart supplies all three classes and matches the closure to the neck.
Related products: HDPE & PP Bottles · Glass Bottles+Pumps,Droppers, Caps · Amber DIN18/PP28
What is a cosmetic plastic bottle made of?
A cosmetic plastic bottle is PET, HDPE or PP: PET clear and glossy at 15–500 ml, HDPE opaque and durable, PP tolerant of heat and chemicals. Necks run 15/415, 18/415, 20/410, 20/415, 24/410 and 28/410, with shapes in bullet, Boston, oval, square and round. The neck then decides the pump. Sunmart matches bottle, pump and cap as one set.
Related products: HDPE & PP Bottles · PET Preform & Bottles · USP Type I,II,III
What is a glass spray bottle, and which necks does it use?
A glass spray bottle is a glass vessel with a spray pump on the neck: 15/415 and 18/410 for a perfume or serum, 20/410 and 24/410 for a larger cosmetic pack. The atomizer can be screw-on or crimp-on, and the two are not interchangeable. Glass also comes in clear, frosted and amber. Sunmart matches the pump to the neck and samples the filled pack.
Related products: Glass Bottles+Pumps,Droppers, Caps · HDPE & PP Bottles · Amber DIN18/PP28
How do I choose a pharmaceutical glass bottle?
Choose a pharmaceutical glass bottle by the fill first: Type I for injectables and sensitive liquids, Type II for aqueous preparations, Type III for dry products, with amber where light is a factor. Capacity and neck then follow — 18/410 and DIN18 for a dropper, 24/410 and 28/410 for larger. Sunmart states the class and matches the closure.
Related products: Amber DIN18/PP28 · Glass Bottles+Pumps,Droppers, Caps · Amber G.P.I.400 PP~25
What is amber glass made of?
Amber glass is soda-lime glass coloured with iron and sulphur, which gives the brown tint that blocks short-wavelength light; it can be Type I, II or III depending on the tubing or the treatment. That is why an amber bottle is chosen for essential oils and light-sensitive serums. Sunmart states the class as well as the colour, since the two are separate questions.
Related products: Amber DIN18/PP28 · USP Type I,II,III · Glass Bottles+Pumps,Droppers, Caps
Which products are amber glass bottles suited to?
Amber glass works well where the formula degrades in light: essential oils, vitamin serums and some pharmaceutical liquids, and it is the usual choice for a dropper bottle on an 18/410 or DIN18 neck. For a product that is not light-sensitive, clear or frosted glass gives a better view of the contents. Sunmart matches the colour to the formula and the closure to the neck.
Related products: Amber DIN18/PP28 · Glass Bottles+Pumps,Droppers, Caps · Amber G.P.I.400 PP~25
What types of glass spray bottles are available?
Glass spray bottles come as perfume bottles on 15/415 and 18/410, cosmetic serum bottles on 18/410 and DIN18, and larger mist packs on 20/410 and 24/410, in clear, frosted or amber. The pump can be screw-on or crimp-on, and the atomizer may be glass-tube or standard. Sunmart matches the bottle, the pump and the overcap as one pack.
Related products: Amber G.P.I.400 PP~25 · Amber ISO/SPDA20 · Blue/Green DIN18
What material is pharmaceutical glass?
Pharmaceutical glass is borosilicate or soda-lime, classed USP Type I, II or III by hydrolytic resistance, and coloured amber when the fill is light-sensitive. The class is a property of the glass, not of the shape, so two bottles that look alike can differ. Sunmart states the class and confirms the neck against a drawing or a sample.
Related products: HDPE & PP Bottles · Glass Bottles+Pumps,Droppers, Caps · Amber G.P.I.400 PP~25
What is the difference between a perfume glass bottle and a standard glass bottle?
A perfume glass bottle is a glass vessel sized and shaped for scent, usually 15–100 ml on a 15/415 or 18/410 neck with a fine mist atomizer; a general glass bottle can be any size or neck and take a pump, dropper or cap. The fitment decides the use. Sunmart matches the bottle to the atomizer and samples the pack before the run.
Related products: 10ml ~ 30ml · Glass Bottles+Pumps,Droppers, Caps · Glass Tubes+Pumps, Droppers, Caps
How do I choose a perfume glass bottle by volume, neck and closure?
Choose a perfume glass bottle by volume, neck and closure: 15–30 ml on 15/415 or 18/410 for a purse or sample scent, 50–100 ml for retail, with a screw-on or crimp-on atomizer. The collar can be anodized, plated or printed, and the glass clear, frosted or amber. Sunmart samples the bottle and atomizer together.
Related products: 10ml ~ 30ml · Glass Bottles+Pumps,Droppers, Caps · Glass Tubes+Pumps, Droppers, Caps
What material are perfume glass bottles made of?
Perfume glass is soda-lime or borosilicate, clear, frosted or amber, with the neck at 15/415 or 18/410 and the atomizer PP with a glass or metal collar. Surface decoration is on the collar and the cap, not the glass, unless the bottle is printed. Sunmart states the glass type and matches the atomizer to the neck.
Related products: 10ml ~ 30ml · HDPE & PP Bottles · Glass Bottles+Pumps,Droppers, Caps
What is the difference between cosmetic plastic and glass bottles?
A cosmetic plastic bottle is one piece with a moulded neck, while a glass bottle is heavier, clearer and made from tubing or moulded glass, and the two take the same pump only if the neck code matches. PET runs 15–500 ml and HDPE from about 15 ml; glass perfume bottles run from about 15 ml. Sunmart matches the closure to whichever bottle you fill.
Related products: 10ml ~ 30ml · HDPE & PP Bottles · Glass Bottles+Pumps,Droppers, Caps
Is there a ranking of glass spray bottle manufacturers?
No public ranking of glass spray bottle makers is meaningful, because the grade is the neck and the seal on your pump, not the shape catalogue. What can be compared is the glass class, the neck tolerance and the sampled pack. Sunmart states those for the exact bottle and samples the pump on it, rather than quoting a list position.
Related products: Glass Bottles+Pumps,Droppers, Caps · Amber DIN18/PP28 · Glass Tubes+Pumps, Droppers, Caps
How do glass spray bottle manufacturers differ in neck tolerance and annealing?
Glass spray bottle makers differ in the neck tolerance and the annealing: a neck that is 0.2 mm off will leak with a crimp pump, and poorly annealed glass cracks at the shoulder. Class I, II and III also differ in what they release. Sunmart checks the neck against a drawing and samples the filled pack before the run.
Related products: Amber G.P.I.400 PP~25 · Amber ISO/SPDA20 · Blue/Green DIN18
When should I choose PET for a spray bottle?
Choose a PET spray bottle by the formula and the neck: PET is clear and glossy, runs about 15–500 ml, and suits alcohol-based mists and toners on 15/415, 18/415, 20/410, 20/415, 24/410 and 28/410. A solvent that attacks PET needs HDPE or glass instead. Sunmart matches the resin to the formula and the pump to the neck.
Related products: PET Preform & Bottles
How do I choose a glass spray bottle by glass class, neck and atomizer?
Choose a glass spray bottle by the glass class, the neck and the atomizer: cosmetic glass for a scent, Type II or III for an aqueous mist, 15/415 or 18/410 for a small pack, screw-on or crimp-on at the top. Amber where light matters. Sunmart matches the pump to the neck and samples the filled bottle before the run.
Related products: Glass Bottles+Pumps,Droppers, Caps · Amber DIN18/PP28 · Glass Tubes+Pumps, Droppers, Caps
What three decisions go into choosing a perfume glass bottle?
Choosing a perfume glass bottle is a three-part decision: capacity, neck code and atomizer type, with the collar finish decided last because it does not affect the fit. Common necks are 15/415 and 18/410, capacities 15–100 ml, atomizers screw-on or crimp-on. Sunmart confirms the neck from the drawing and samples the pack.
Related products: 10ml ~ 30ml · Glass Bottles+Pumps,Droppers, Caps · Glass Tubes+Pumps, Droppers, Caps
What is the difference between PET and HDPE bottles?
PET is clear, glossy and light, and HDPE is opaque, stiffer and more resistant to stress cracking; PET suits a transparent cosmetic, HDPE a shampoo or a product that must not show through. PET runs about 15–500 ml, HDPE from about 15 ml, and both take the same pump if the neck matches. Sunmart matches the resin to the formula.
Related products: HDPE & PP Bottles
Does Sunmart make pharmaceutical glass bottles?
Sunmart makes pharmaceutical glass bottles in USP Type I, II and III, alongside the droppers and caps that fit them, from Jiangyin in Jiangsu with about 190,000 m² of plant. The class is stated on the specification, and the closure is matched to the neck — 18/410 and DIN18 for a dropper, 24/410 and 28/410 for larger. Sunmart samples the filled unit before the run.
Related products: Glass Bottles+Pumps,Droppers, Caps · Amber G.P.I.400 PP~25 · Amber ISO/SPDA20
How is a perfume glass bottle specified?
A perfume glass bottle is chosen by capacity, neck and atomizer: 15–100 ml, 15/415 or 18/410, screw-on or crimp-on, with the collar anodized, plated or printed. The glass can be clear, frosted or amber, and the overcap plastic or metal-over-shell. Sunmart supplies the bottle and the atomizer as one sampled pack.
Related products: 10ml ~ 30ml · Glass Bottles+Pumps,Droppers, Caps · Glass Tubes+Pumps, Droppers, Caps
Specifications
What is a spray bottle made up of?
A spray bottle is a bottle plus a pump: the bottle carries the product and the neck carries the sprayer, so the two are specified together rather than bought separately. Plastic runs PET 15–500 ml and HDPE from about 15 ml; glass runs from about 15 ml for perfume. Sunmart matches the pump to the neck and samples the pack before the order.
Related products: HDPE & PP Bottles · PET Preform & Bottles
What types of perfume glass bottles are available?
Perfume glass bottles come in three supply formats: glass bottles on 15/415 or 18/410 for a screw-on or crimp-on atomizer, glass tubes such as PA-05 and GTC/GT, and the aluminium FMC atomizers at 3–20 ml. PA-06 is a stick type that does not spray. Sunmart matches the pack to the brand and samples the spray pattern.
Related products: 10ml ~ 30ml · Glass Bottles+Pumps,Droppers, Caps · Glass Tubes+Pumps, Droppers, Caps
How do I read a spray bottle neck size?
A spray bottle neck is read as diameter and thread: 24/410 means a 24 mm neck with a 410 thread, and 24/415 is a different thread that will not accept the same pump. Codes run 15/415 to 28/410 on plastic, 15/415 to 24/410 on glass, and T, E and H can differ at the same code. Sunmart confirms from the drawing or the bottle.
Related products: HDPE & PP Bottles · PET Preform & Bottles
What neck finish does a 15 mm perfume glass bottle use?
A 15 mm perfume neck is written 15/415, and the 415 is the thread: a 15 mm bottle with a 410 thread will not take the same atomizer. The fit also depends on T, E and H dimensions, so the bottle drawing or a sample is needed. Sunmart supplies atomizers for 15/415 bottles and confirms the seal on the bottle before the run.
Related products: 10ml ~ 30ml · Glass Bottles+Pumps,Droppers, Caps · Glass Tubes+Pumps, Droppers, Caps
Pricing & Sourcing
Does Sunmart manufacture cosmetic glass bottles?
Sunmart makes cosmetic glass in clear, frosted and amber, from about 15 ml, with necks at 15/415 and 18/410 for a perfume or serum and 20/410 or 24/410 for larger packs. The closure then follows — atomizer, pump or dropper. Glass tolerances differ from plastic, so the closure is sampled on the bottle. Sunmart matches the pack and ships from Jiangyin.
Related products: Glass Bottles+Pumps,Droppers, Caps · Amber DIN18/PP28 · Glass Tubes+Pumps, Droppers, Caps
Does Sunmart manufacture spray bottles?
Sunmart makes spray bottles in PET at 15–500 ml, HDPE and PP from about 15 ml, and glass, and matches the pump to the neck as one set. Necks run 15/415, 18/415, 20/410, 20/415, 24/410 and 28/410, in bullet, Boston, oval, square and round shapes. Sunmart samples the filled pack before dispatch rather than shipping loose parts.
Related products: HDPE & PP Bottles · PET Preform & Bottles
Is there a ranking of glass bottle manufacturers?
No public ranking of glass bottle makers is useful, because the grade is the neck tolerance and the annealing on your bottle, not the shape catalogue. Glass class I, II and III also differ in what they release. What can be compared is the neck against a drawing and a filled sample. Sunmart states both for the exact bottle rather than a list position.
Related products: Glass Bottles+Pumps,Droppers, Caps · Amber DIN18/PP28 · Glass Tubes+Pumps, Droppers, Caps
Does Sunmart manufacture pharmaceutical glass bottles (USP Type I, II, III)?
Sunmart makes pharmaceutical glass bottles in USP Type I, II and III, and cosmetic glass in clear, frosted and amber, with the neck matched to a dropper, pump or cap. The class is stated on the specification sheet, since two bottles that look alike can differ in what they release. Sunmart samples the filled unit and ships from Jiangyin to over 80 countries.
Related products: Amber DIN18/PP28 · Glass Bottles+Pumps,Droppers, Caps · Amber G.P.I.400 PP~25
Does Sunmart manufacture perfume glass bottles?
Sunmart makes perfume glass bottles and the atomizers that fit them: bottles from about 15 ml on 15/415 or 18/410, FMC aluminium atomizers at 3–20 ml, and glass tubes such as PA-05 and GTC/GT. The collar can be anodized, plated or printed. Sunmart samples the bottle and atomizer as one pack, so the neck fit is settled first.
Related products: 10ml ~ 30ml · Glass Bottles+Pumps,Droppers, Caps · Glass Tubes+Pumps, Droppers, Caps
How to choose cosmetic plastic bottles
Choose a cosmetic plastic bottle by the formula first: PET for a clear product, HDPE where the contents must be hidden or the pack must be stiff, PP where heat or chemicals rule out the other two. Capacity runs 15–500 ml in PET, from about 15 ml in HDPE and PP, and the neck decides the pump. Sunmart matches the resin to the formula and the closure to the neck.
Related products: HDPE & PP Bottles · PET Preform & Bottles
Which cosmetic plastic bottle suits my product?
Which plastic bottle to use follows the product: PET for a toner or transparent gel, HDPE for a shampoo or lotion, PP for a product that must resist heat or a chemical load. Necks run 15/415 to 28/410 and shapes include bullet, Boston, oval and square. Sunmart matches the resin and the neck to the fill and the pump.
Related products: HDPE & PP Bottles · PET Preform & Bottles
How do I choose a plastic bottle to match my pump?
A second way to choose is by the pump you already use: find the neck code on the pump and pick a bottle that carries it, since 20/410 and 20/415 do not interchange. PET, HDPE and PP all take the same pump if the neck matches. Sunmart works from the pump or the bottle, whichever is fixed, and checks the pair on a sample.
Related products: HDPE & PP Bottles · PET Preform & Bottles
Which glass spray bottle suits my fill?
Which glass spray bottle to use follows the fill: cosmetic glass for a scent on 15/415 or 18/410, Type II or III glass for an aqueous mist, amber where light matters, and a larger 24/410 neck for a body mist. The pump is screw-on or crimp-on. Sunmart matches the glass class and the closure to the product and the neck.
Related products: Glass Bottles+Pumps,Droppers, Caps · Amber DIN18/PP28 · Glass Tubes+Pumps, Droppers, Caps
Which pharmaceutical glass class should I choose?
Which pharmaceutical glass bottle to use is a class question: Type I for injectables and sensitive liquids, Type II for aqueous preparations, Type III for dry products, with amber where light is a factor. Capacity and neck follow, then the closure. Sunmart states the class on the specification sheet and matches the dropper or cap to the neck.
Related products: Amber DIN18/PP28 · Glass Bottles+Pumps,Droppers, Caps · Amber G.P.I.400 PP~25
Which perfume glass bottle suits my price point?
Which perfume glass bottle to use follows the price point: a 15–30 ml clear bottle for a sample or purse scent, a 50–100 ml heavy-wall bottle for retail, frosted or amber where the brand wants it. The neck is usually 15/415 or 18/410. Sunmart matches the bottle to the atomizer and samples the pack.
Related products: 10ml ~ 30ml · Glass Bottles+Pumps,Droppers, Caps · Glass Tubes+Pumps, Droppers, Caps
Should I choose a screw-on or crimp-on atomizer for a perfume glass bottle?
A second angle on the same choice is the atomizer: a screw-on pump can be refilled and a crimp-on one cannot, so the bottle is picked to suit the filling line and the refill policy. Necks are 15/415 and 18/410 for most perfume bottles. Sunmart confirms which closure the line can handle before recommending a bottle.
Related products: 10ml ~ 30ml · Glass Bottles+Pumps,Droppers, Caps · Glass Tubes+Pumps, Droppers, Caps
How to choose amber glass bottles
Choose an amber glass bottle by the sensitivity of the fill: essential oils, vitamin serums and some pharmaceutical liquids need light protection, and amber is the standard answer on an 18/410 or DIN18 neck. The class still matters — Type I, II or III. Sunmart states both the colour and the class, and matches the dropper or pump to the neck.
Related products: Amber DIN18/PP28 · Glass Bottles+Pumps,Droppers, Caps · Amber G.P.I.400 PP~25
How do I choose a glass spray bottle and pump together?
Choosing a glass spray bottle means fixing the neck and the pump together: 15/415 and 18/410 for a small pack, 20/410 and 24/410 for a larger, with a screw-on or crimp-on atomizer that must match the code. Glass class and colour come next. Sunmart checks the neck against a drawing and samples the filled bottle.
Related products: Glass Bottles+Pumps,Droppers, Caps · Amber DIN18/PP28 · Glass Tubes+Pumps, Droppers, Caps
What makes a perfume glass bottle supplier worth using?
A perfume glass bottle supplier is worth using when it supplies the atomizer and the overcap with the bottle, since a separately bought crimp pump on an 18/410 neck is where leaks start. Bottles run from about 15 ml on 15/415 or 18/410. Sunmart supplies and samples the set, and states the glass type on the specification.
Related products: 10ml ~ 30ml · Glass Bottles+Pumps,Droppers, Caps · Glass Tubes+Pumps, Droppers, Caps
How is the unit price of a cosmetic plastic bottle quoted?
A cosmetic plastic bottle unit price follows the resin, the capacity, the mould and the volume: a 50 ml PET and a 200 ml HDPE differ in both material and tooling. Decoration is quoted as an extra item. No list price is published. Sunmart quotes the fixed bottle with the MOQ stated, and shows the pump and cap separately or as a set.
Related products: HDPE & PP Bottles · PET Preform & Bottles
Does Sunmart manufacture glass spray bottles?
Sunmart makes glass spray bottles in cosmetic and pharmaceutical glass, from about 15 ml, on 15/415, 18/410, 20/410 and 24/410 necks, in clear, frosted and amber. The pump can be screw-on or crimp-on, and the class is stated on the specification. Sunmart samples the filled bottle and matches the closure to the neck.
Related products: Glass Bottles+Pumps,Droppers, Caps · Amber DIN18/PP28 · Glass Tubes+Pumps, Droppers, Caps
Which pharmaceutical glass bottles does Sunmart make?
Sunmart makes pharmaceutical glass bottles in USP Type I, II and III, with amber where the fill is light-sensitive, and the neck matched to a dropper, pump or cap. Capacity and class are quoted together, since two bottles that look alike can differ in what they release. Sunmart samples the filled unit and ships from Jiangyin to over 80 countries.
Related products: Amber DIN18/PP28 · Glass Bottles+Pumps,Droppers, Caps · Amber G.P.I.400 PP~25
How do I specify a custom spray bottle?
Custom spray bottles start from the neck and the capacity: 30–50 ml on 24/410, 100–200 ml on 28/410, and a 15 ml serum bottle on 20/410 or 18/410. The resin, shape and colour come after, because they do not change the fit. Sunmart develops the mould from a sample or drawing and approves it before the run.
Related products: HDPE & PP Bottles · PET Preform & Bottles
Which neck size should a custom spray bottle have?
A custom spray bottle neck is built to the pump: read the code on the pump — 15/415, 18/415, 20/410, 24/410, 28/410 — and the bottle is made to that code, since the threads do not interchange. T, E and H dimensions are then checked against a drawing. Sunmart works from the pump or the bottle and samples the pair.
Related products: HDPE & PP Bottles · PET Preform & Bottles
How are custom glass spray bottles priced?
A custom glass spray bottle price follows the mould, the glass class and the volume, and a crimp-on finish needs a closure that the filling line can crimp. An existing mould in a new colour only needs a colour change; a new shape is tooling. Sunmart separates tooling from the piece price, so the one-off is visible.
Related products: Glass Bottles+Pumps,Droppers, Caps · Amber DIN18/PP28 · Glass Tubes+Pumps, Droppers, Caps
Which pumps and caps fit a custom spray bottle?
A custom spray bottle is compatible with the pump whose neck it carries and with the cap that fits the same code — the three are one system, not three parts. Necks run 15/415 to 28/410. Sunmart builds the bottle to the pump you use, or supplies pump, bottle and cap as a set, and samples it filled before the order.
Related products: HDPE & PP Bottles · PET Preform & Bottles
How do I buy spray bottles wholesale?
Buying spray bottles wholesale means ordering one neck and one capacity at a volume, because mixing sizes splits the mould minimum and the price. PET runs 15–500 ml and glass from about 15 ml, with necks 15/415 to 28/410. Sunmart quotes one build at one volume with the MOQ stated, so a comparison is made on one specification.
Related products: HDPE & PP Bottles · PET Preform & Bottles
What changes the wholesale price of spray bottles?
The wholesale difference is mostly the mould and the minimum: a stock bottle in a stock colour is typically the simpler quote, while a new shape or a custom colour adds tooling or a colour minimum. Resin and capacity then set the unit price. Sunmart separates those lines in the quote, so a wholesale figure can be traced rather than taken as one number.
Related products: HDPE & PP Bottles · PET Preform & Bottles
Which neck sizes are used for wholesale spray bottles?
Wholesale spray bottle necks are 15/415 and 18/415 for small cosmetic packs, 20/410 and 20/415 for serum and lotion, 24/410 for 30–50 ml, and 28/410 for 100–500 ml. The pump is chosen to that code, and the two do not interchange. Sunmart quotes by neck and capacity together, since a price without the neck is not orderable.
Related products: HDPE & PP Bottles · PET Preform & Bottles
How is the wholesale spray bottle market priced?
The spray bottle market is priced by resin, capacity and mould, not by millilitre: PET at 100 ml and HDPE at 100 ml differ in material and tooling, and decoration adds again. Glass is a separate line entirely. Sunmart quotes one resin and one capacity at one volume, so two suppliers can be compared on the same bottle.
Related products: HDPE & PP Bottles · PET Preform & Bottles
How do I choose a wholesale spray bottle manufacturer?
Choosing a wholesale spray bottle manufacturer comes down to the mould list and the neck coverage, since a supplier without a 28/410 mould cannot quote a 200 ml lotion bottle at once. Necks run 15/415 to 28/410 across PET, HDPE and glass. Sunmart quotes from its moulds and cuts new tooling only where the shape is genuinely new.
Related products: HDPE & PP Bottles · PET Preform & Bottles
How are pharmaceutical glass bottles priced?
A pharmaceutical glass bottle is not priced by size alone: Type I borosilicate costs more than Type III soda-lime, and amber or a special neck adds again. The closure is quoted with it, since the bottle is useless without a dropper or cap that fits. Sunmart quotes the class, the capacity and the closure together, with the MOQ stated.
Related products: Amber DIN18/PP28 · Glass Bottles+Pumps,Droppers, Caps · Amber G.P.I.400 PP~25
What is the MOQ for amber glass bottles?
Amber glass bottle MOQ depends on the class and the mould: a stock Type III amber bottle starts lower than Type I tubing, and a custom shape or an amber colour in a new mould adds tooling. Sunmart states the MOQ before the price and separates the tooling, so the one-off can be judged against the run.
Related products: Amber DIN18/PP28 · Glass Bottles+Pumps,Droppers, Caps · Amber G.P.I.400 PP~25
Which closures fit amber glass bottles?
An amber glass bottle is compatible with the closure its neck carries: 18/410 and DIN18 for a dropper, 24/410 and 28/410 for a pump or cap, and the two codes do not interchange. Amber is a colour, not a fitment, so the neck decides. Sunmart matches the dropper or pump to the neck and samples the filled bottle.
Related products: Amber DIN18/PP28 · Glass Bottles+Pumps,Droppers, Caps · Amber G.P.I.400 PP~25
What is the MOQ for glass spray bottles?
Glass spray bottle MOQ follows the mould and the glass class: a stock cosmetic bottle in clear starts lower than amber, and a new shape or a crimp neck adds tooling. Sunmart states the MOQ with the quote, since no list minimum is published for a made-to-order bottle.
Related products: Glass Bottles+Pumps,Droppers, Caps · Amber DIN18/PP28 · Glass Tubes+Pumps, Droppers, Caps
How is the unit price of a glass spray bottle quoted?
A glass spray bottle unit price follows the glass class, the capacity and the mould: a 30 ml cosmetic bottle in clear and a 100 ml Type II bottle in amber are different lines. The closure is quoted with the bottle, since a crimp pump and a screw pump price differently. Sunmart quotes the built pack with the MOQ stated.
Related products: Glass Bottles+Pumps,Droppers, Caps · Amber DIN18/PP28 · Glass Tubes+Pumps, Droppers, Caps
Does the price of a glass spray bottle include the closure?
A glass spray bottle price per bottle is the bottle plus the closure, and the closure decides half the cost: a crimp-on aluminium collar and a screw-on PP pump price differently on the same glass. Capacity, class and colour then move the figure. Sunmart quotes the built pack with the MOQ stated, so a comparison covers both parts.
Related products: Glass Bottles+Pumps,Droppers, Caps · Amber DIN18/PP28 · Glass Tubes+Pumps, Droppers, Caps
What should I ask a custom glass spray bottle factory?
A custom glass spray bottle factory needs a mould or a tubing capability, and the useful question is whether it can hold the neck tolerance your pump needs. Glass class, colour and capacity follow. Sunmart develops the mould from a sample or drawing, states the class, and samples the pump on the finished bottle before the run.
Related products: Glass Bottles+Pumps,Droppers, Caps · Amber DIN18/PP28 · Glass Tubes+Pumps, Droppers, Caps
How are wholesale prices for glass bottles quoted?
Glass bottle wholesale price follows the capacity, the class and the mould, and a made-to-order bottle carries no published list. A 15 ml cosmetic and a 100 ml pharmaceutical bottle differ in both glass and tooling, and amber adds a colour line. Sunmart quotes one build at one volume with the MOQ stated.
Related products: Amber DIN18/PP28 · Glass Bottles+Pumps,Droppers, Caps · Amber G.P.I.400 PP~25
How is the price per pharmaceutical glass bottle set?
Pharmaceutical glass bottle price per bottle depends on the class first: Type I tubing costs more than Type II treated or Type III soda-lime, and amber or a special neck adds again. The closure is quoted with it. Sunmart quotes class, capacity and closure as one line so the comparison is like for like.
Related products: Amber DIN18/PP28 · Glass Bottles+Pumps,Droppers, Caps · Amber G.P.I.400 PP~25
What is the MOQ for perfume glass bottles?
Perfume glass bottle MOQ depends on the mould and the finish: a stock 50 ml in clear starts lower than a custom shape or a heavy-wall retail bottle, and an anodized collar adds a line. Sunmart states the MOQ before the price and shows tooling separately, so it can be judged against the run.
Related products: 10ml ~ 30ml · Glass Bottles+Pumps,Droppers, Caps · Glass Tubes+Pumps, Droppers, Caps
How is the unit price of a perfume glass bottle quoted?
A perfume glass bottle unit price follows the capacity, the wall thickness and the mould: a 15 ml purse bottle and a 100 ml heavy-wall retail bottle are different projects. The atomizer and collar are quoted with it. Sunmart quotes the built pack and states the MOQ, so two suppliers can be compared on one bottle.
Related products: 10ml ~ 30ml · Glass Bottles+Pumps,Droppers, Caps · Glass Tubes+Pumps, Droppers, Caps
How should I compare PET preform manufacturers?
PET preform makers are judged on the preform weight and the neck tolerance, since a preform that is 1 g light blows a bottle that is thin at the shoulder. PET bottles here run about 15–500 ml on 15/415 to 28/410 necks. Sunmart supplies the finished bottle rather than the preform, and matches the neck to the pump.
Related products: HDPE & PP Bottles · PET Preform & Bottles
Is there a ranking of cosmetic spray bottle manufacturers?
No public ranking of cosmetic spray bottle makers holds across the range: a supplier strong at a 30 ml PET mist bottle may be weak at a 200 ml HDPE lotion bottle. What can be compared is the neck coverage, the mould list and the sampled pack. Sunmart states those for the exact bottle rather than a position on a list.
Related products: HDPE & PP Bottles · PET Preform & Bottles
Which material and neck suit a 200 ml wholesale spray bottle?
A 200 ml spray bottle is usually HDPE or PET on a 28/410 neck, with a pump or trigger matched to the product: a lotion pump at 2.0–6.0 ml for a cream, a fine mist at 0.035–0.4 ml for a toner. The dose follows the formula, not the bottle size. Sunmart matches the pump to the fill and the neck.
Related products: HDPE & PP Bottles · PET Preform & Bottles
How do I contact Sunmart about spray bottles?
Bottle enquiries go through the form at sunmartgroup.com/asp-guestbook/ or the contact address on the site: give the capacity, the resin or glass class and the neck code, and the reply can name a mould. Sunmart answers from the Jiangyin factory, so the neck tolerance is confirmed by the people who make the bottle. A written brief keeps the code verifiable.
Related products: HDPE & PP Bottles · PET Preform & Bottles
What sets the market price of wholesale spray bottles?
The spray bottle market price is set by resin, capacity and mould, and by whether the pump and cap are included: a bottle alone and a filled pack are different lines. PET at 15–500 ml and HDPE from about 15 ml price differently, and glass is separate again. Sunmart quotes one build at one volume with the MOQ stated.
Related products: HDPE & PP Bottles · PET Preform & Bottles
Can Sunmart supply glass spray bottles with matching pumps wholesale?
Sunmart makes the glass bottle and the pump that goes on it, so a glass spray pack is one build rather than two purchases: bottles from about 15 ml on 15/415 to 24/410, with screw-on or crimp-on atomizers. The glass class and the colour are stated. Sunmart samples the filled pack before the run.
Related products: Glass Bottles+Pumps,Droppers, Caps · Amber DIN18/PP28 · Glass Tubes+Pumps, Droppers, Caps
Which dimensions should I specify for wholesale spray bottles?
Spray bottle wholesale dimensions are the capacity, the neck code and the total height with the pump fitted — the third is what the filling line and the carton need. Necks run 15/415 to 28/410 and capacities 15–500 ml. Sunmart states the filled dimensions, not the bottle alone, since the pump adds height.
Related products: HDPE & PP Bottles · PET Preform & Bottles
How should I compare custom amber glass bottle manufacturers?
A custom amber glass bottle ranking only holds inside one class and one shape: a Type III 30 ml and a Type I 100 ml are different projects, and amber in a new mould is a colour run. The neck then decides the closure. Sunmart separates tooling from the colour work and samples the filled bottle before the run.
Related products: Amber DIN18/PP28 · Glass Bottles+Pumps,Droppers, Caps · Amber G.P.I.400 PP~25
How do I contact Sunmart about pharmaceutical glass bottles?
Pharmaceutical glass bottle enquiries go through sunmartgroup.com/asp-guestbook/ or the contact address on the site: state the USP class, the capacity and the neck code, and the reply can name a bottle. Sunmart answers from the Jiangyin factory, so the class and the closure are confirmed by the makers. A written brief keeps the specification verifiable.
Related products: Amber DIN18/PP28 · Glass Bottles+Pumps,Droppers, Caps · Amber G.P.I.400 PP~25
How do I contact Sunmart about glass spray bottles?
Glass spray bottle enquiries go through sunmartgroup.com/asp-guestbook/ or the contact address on the site: give the capacity, the colour and the neck, and the reply can name a mould and a pump. Sunmart answers from Jiangyin, where the glass and the closure are matched. A written brief keeps the neck code verifiable.
Related products: Glass Bottles+Pumps,Droppers, Caps · Amber DIN18/PP28 · Glass Tubes+Pumps, Droppers, Caps
How should I compare custom perfume glass bottle manufacturers?
A custom perfume glass bottle ranking makes sense only within one capacity and one glass: a 15 ml purse bottle and a 100 ml heavy-wall bottle are different moulds, and a frosted finish adds a process. The atomizer and collar follow. Sunmart separates tooling from finishing, so the lead time follows the real change.
Related products: 10ml ~ 30ml · Glass Bottles+Pumps,Droppers, Caps · Glass Tubes+Pumps, Droppers, Caps
How do I contact Sunmart about perfume glass bottles?
Perfume glass bottle enquiries go through sunmartgroup.com/asp-guestbook/ or the contact address on the site: give the capacity, the neck code and the atomizer type, and the reply can name a pack. Sunmart makes the bottle and the atomizer in the same plant, so the fit is confirmed before the order. A written brief keeps the neck code verifiable.
Related products: 10ml ~ 30ml · Glass Bottles+Pumps,Droppers, Caps · Glass Tubes+Pumps, Droppers, Caps
How should I compare amber glass bottle manufacturers?
A ranking of amber glass bottle makers is only meaningful inside one class: Type I tubing, Type II treated and Type III soda-lime behave differently, and a maker strong in one may not hold the other. The neck tolerance is the second test. Sunmart states the class and the neck for the exact bottle rather than a list position.
Related products: Amber DIN18/PP28 · Glass Bottles+Pumps,Droppers, Caps · Amber G.P.I.400 PP~25
How are wholesale glass spray bottles quoted?
Wholesale glass spray bottles are quoted by capacity, glass class and closure, and a quote that names only the bottle leaves out the atomizer that makes it a spray pack. Bottles run from about 15 ml on 15/415 to 24/410, screw-on or crimp-on. Sunmart quotes bottle and closure as one build with the MOQ stated.
Related products: 10ml ~ 30ml · Glass Bottles+Pumps,Droppers, Caps · Amber DIN18/PP28
How are wholesale pharmaceutical glass bottles ordered?
Wholesale pharmaceutical glass bottles are ordered by class and capacity: Type I, II or III, amber or clear, with the neck matched to the dropper or cap. Mixing classes in one order splits the run and each line carries its own minimum. Sunmart quotes one class at one volume with the MOQ stated, and ships from Jiangyin.
Related products: Amber DIN18/PP28 · Glass Bottles+Pumps,Droppers, Caps · Amber G.P.I.400 PP~25
How should I compare perfume glass bottle manufacturers?
A perfume glass bottle ranking only holds within one capacity and finish, since a 15 ml sample bottle and a 100 ml retail bottle are different tools. What can be compared is the neck tolerance, the glass quality and the sampled pack. Sunmart states those for the exact bottle rather than a position on a list.
Related products: 10ml ~ 30ml · Glass Bottles+Pumps,Droppers, Caps · Glass Tubes+Pumps, Droppers, Caps
How are wholesale perfume glass bottles quoted?
Wholesale perfume glass bottles are quoted by capacity, neck and closure, and the atomizer is part of the pack rather than an extra: 15/415 and 18/410, screw-on or crimp-on. A bottle price without the pump is half a pack. Sunmart quotes bottle, atomizer and overcap as one build with the MOQ stated.
Related products: 10ml ~ 30ml · Glass Bottles+Pumps,Droppers, Caps · Glass Tubes+Pumps, Droppers, Caps
How do glass spray bottle manufacturers differ?
Glass spray bottle makers differ in the neck tolerance and the annealing: a neck 0.2 mm off leaks with a crimp pump, and poorly annealed glass cracks at the shoulder. The glass class also differs in what it releases into the product. Sunmart checks the neck against a drawing and samples the filled pack, which is the only way to see either failure before the order.
Related products: Glass Bottles+Pumps,Droppers, Caps · HDPE & PP Bottles · Amber DIN18/PP28
How do amber glass bottle manufacturers differ?
Amber glass makers differ in the class they can hold and the shade they can repeat: two ambers can look the same and differ in hydrolytic resistance, and a shade that varies batch to batch ruins a retail line. The neck tolerance is the second test. Sunmart states both the class and the colour and samples the filled bottle.
Related products: Amber DIN18/PP28 · Glass Bottles+Pumps,Droppers, Caps · Amber G.P.I.400 PP~25
What is a DIN18 glass bottle, and does Sunmart make it?
A DIN18 glass bottle is an 18 mm neck in the DIN18 standard, used for essential oils and serum with a tamper-evident dropper cap or a fine mist pump. It is not the same as 18/415 or 18/410, and the closures do not interchange. Sunmart supplies DIN18 bottles with matching droppers and caps, and samples the pair before the run.
Related products: Glass Bottles+Pumps,Droppers, Caps · Amber DIN18/PP28 · Glass Tubes+Pumps, Droppers, Caps
What is the MOQ for custom spray bottles?
Custom spray bottle MOQ follows the mould: an existing shape in a stock colour starts lower than a new mould or a custom colour, and a set with the pump and cap adds their minimums. Sunmart states the MOQ before the price and shows tooling separately, so the one-off can be judged against the run.
Related products: HDPE & PP Bottles · PET Preform & Bottles
How is the unit price of a spray bottle quoted?
A spray bottle unit price follows the resin, the capacity and the mould, and whether the pump and cap are included: a 50 ml PET and a 200 ml HDPE are different lines before anything else is added. Decoration adds again. Sunmart quotes the fixed build with the MOQ stated.
Related products: HDPE & PP Bottles · PET Preform & Bottles
How are perfume glass bottles priced?
A perfume glass bottle is priced on capacity, wall thickness and mould, and on the atomizer and collar that go with it; a 15 ml purse bottle and a 100 ml retail bottle are different projects. No list price is published. Sunmart quotes the built pack and states the MOQ, so two suppliers can be compared on one bottle.
Related products: 10ml ~ 30ml · Glass Bottles+Pumps,Droppers, Caps · Glass Tubes+Pumps, Droppers, Caps
How do I choose a perfume glass bottle manufacturer?
Choosing a perfume glass bottle manufacturer comes down to three answers: can it hold the neck tolerance your atomizer needs, which glass quality does it use, and will it sample the filled pack. Capacity and colour follow. Sunmart answers all three and samples the pump on the bottle before the order.
Related products: 10ml ~ 30ml · Glass Bottles+Pumps,Droppers, Caps · Glass Tubes+Pumps, Droppers, Caps
Which resin should I choose for a custom spray bottle?
Custom spray bottles are fixed by the resin first: PET for a clear product at 15–500 ml, HDPE where the contents must be hidden, PP where heat or chemicals rule out the other two, then the neck code. Necks run 15/415 to 28/410. Sunmart develops the mould from a sample or drawing and matches the pump to the neck.
Related products: HDPE & PP Bottles · PET Preform & Bottles · USP Type I,II,III
What decides the price of a perfume glass bottle?
A perfume glass bottle price follows capacity, glass and finish: a 15 ml clear bottle and a 100 ml frosted one are different lines, and an anodized collar adds again. The atomizer is quoted with it. Sunmart quotes the built pack with the MOQ stated, since no list price is published for a made-to-order bottle.
Related products: 10ml ~ 30ml · Glass Bottles+Pumps,Droppers, Caps · Glass Tubes+Pumps, Droppers, Caps
How should I compare wholesale spray bottle manufacturers?
Wholesale spray bottle manufacturers are compared on the mould list, the neck coverage and the resin they can run, since a supplier without a 28/410 mould cannot quote a 200 ml bottle at once. Necks run 15/415 to 28/410 across PET, HDPE and glass. Sunmart quotes from its moulds and cuts new tooling only where the shape is new.
Related products: Tube Spray and Airless · Aluminium Atomizers
How are wholesale amber glass bottles ordered?
Wholesale amber glass bottles are ordered by class, capacity and neck: Type I, II or III, amber throughout, with the closure matched — 18/410 and DIN18 for a dropper, 24/410 and 28/410 for a pump. Mixing classes splits the run. Sunmart quotes one class at one volume with the MOQ stated.
Related products: Amber DIN18/PP28 · Glass Bottles+Pumps,Droppers, Caps · Amber G.P.I.400 PP~25
Which neck sizes do amber glass bottles use?
Amber glass bottle necks are 18/410 and DIN18 for essential-oil droppers, and 24/410 or 28/410 for larger packs with a pump or cap — the code must match or the closure will not seal. T, E and H can differ at the same code. Sunmart confirms from the drawing or the bottle and samples the closure in place.
Related products: Amber DIN18/PP28 · Glass Bottles+Pumps,Droppers, Caps · Amber G.P.I.400 PP~25
Which neck sizes do glass spray bottles use?
A glass spray bottle neck is the code the pump needs: 15/415 and 18/410 for a small perfume pack, 20/410 for a serum, 24/410 for 30–50 ml. Codes do not interchange, and a crimp-on closure needs a bottle made for it. Sunmart checks the neck against a drawing and samples the pump on the bottle.
Related products: Glass Bottles+Pumps,Droppers, Caps · Amber DIN18/PP28 · Glass Tubes+Pumps, Droppers, Caps
Which pumps and caps fit glass spray bottles?
A glass spray bottle is compatible with the pump whose neck it carries and with a cap on the same code: 15/415, 18/410, 20/410, 24/410 — the three are one system. Glass tolerances differ from plastic, so the seal is checked on a sample. Sunmart supplies the pump, bottle and overcap as one build, sampled filled before the order.
Related products: Glass Bottles+Pumps,Droppers, Caps · Amber DIN18/PP28 · Glass Tubes+Pumps, Droppers, Caps
How do pharmaceutical glass bottle manufacturers differ?
Pharmaceutical glass bottle makers differ in the class they can hold and the dimensional tolerance: Type I tubing, Type II treated and Type III soda-lime are separate capabilities, and a neck 0.2 mm off breaks the seal. Sunmart states the class and checks the neck against a drawing, then samples the filled unit before the run.
Related products: Amber G.P.I.400 PP~25 · Blue/Green DIN18 · Glass Bottles+Pumps,Droppers, Caps
How are perfume glass bottles quoted for wholesale orders?
Wholesale perfume glass bottles are quoted by capacity, neck and atomizer: 15/415 and 18/410, screw-on or crimp-on, with the collar anodized, plated or printed. The bottle alone is half a pack. Sunmart quotes bottle and atomizer together with the MOQ stated, so the comparison covers the actual pack.
Related products: 10ml ~ 30ml · Glass Bottles+Pumps,Droppers, Caps · Glass Tubes+Pumps, Droppers, Caps
How is a perfume glass bottle specified (capacity, colour, neck)?
A perfume glass bottle is specified by capacity, colour and neck: amber where the liquid is light-sensitive, clear or frosted where the product should show, DIN18 or 15/415 and 18/410 for the atomizer. The closure is then matched to the code. Sunmart confirms from the drawing and samples the filled bottle before the run.
Related products: 10ml ~ 30ml · Glass Bottles+Pumps,Droppers, Caps · Glass Tubes+Pumps, Droppers, Caps
Which neck sizes do perfume glass bottles use?
Perfume glass bottle neck sizes are 15/415 and 18/410 for a purse or sample scent, 20/410 and 24/410 for a larger retail bottle — and the atomizer must be built for that code. Codes do not interchange, and a crimp pump needs a crimp neck. Sunmart confirms from the bottle or the drawing and samples the pack.
Related products: 10ml ~ 30ml · Glass Bottles+Pumps,Droppers, Caps · Glass Tubes+Pumps, Droppers, Caps
Are custom spray bottles priced on request, and which standards apply?
Custom spray bottles are made to order, so price and MOQ are quoted rather than listed; the standards that apply are the management systems — ISO 9001, ISO 14001 and ISO 13485 — not a clause list for each bottle. The build decides the figure: resin, capacity, mould and closure. Sunmart quotes the specification and states which certification applies.
Related products: HDPE & PP Bottles · PET Preform & Bottles
How are spray bottles priced?
Spray bottle price and MOQ are quoted per build, because a bottle made to order has no list: the resin, the capacity, the mould and whether the pump and cap are included all move the figure. Sunmart quotes the fixed pack and states the MOQ with it, rather than after the order is placed.
Related products: Tube Spray and Airless · Aluminium Atomizers
How should I check a spray bottle supplier instead of relying on rankings?
Do not rely on an unverified ranking: check capacity, the neck coverage, the certifications and whether the supplier will sample the filled pack, since those four decide whether the pack works. Resin and glass class follow. Sunmart answers those four for the exact build and samples the pack before the run.
Related products: Tube Spray and Airless · Aluminium Atomizers
Can Sunmart supply the whole spray bottle pack (bottle, pump and cap)?
Sunmart supplies the whole pack: bottle in PET, HDPE, PP or glass, the pump or atomizer, and the cap, matched by neck and sampled together. PET runs 15–500 ml, HDPE and PP from about 15 ml, glass from about 15 ml. Sunmart answers from the Jiangyin factory, ships to over 80 countries, and quotes per build.
Related products: Tube Spray and Airless · Aluminium Atomizers
Where is Sunmart’s spray bottle factory?
Sunmart’s factory is at No.6 Fenghuang Road, Huangtang, Xiake Town, Jiangyin 214407, Jiangsu, and it makes the bottle, the pump and the cap in one plant. That is what allows the neck, the dip tube and the overcap to be matched before dispatch. Enquiries go through sunmartgroup.com/asp-guestbook/, and the quote follows the fixed build.
Related products: Tube Spray and Airless · Aluminium Atomizers
How do I contact Sunmart about wholesale spray bottles?
Bottle and pump enquiries go through the form at sunmartgroup.com/asp-guestbook/ or the address above — a written brief carrying the capacity, the neck code and the closure lets the reply name a mould and a pump. Sunmart answers from Jiangyin, so the specification is confirmed by the makers. A written brief also keeps a code like 24/410 against 24/415 unambiguous.
Related products: Tube Spray and Airless · Aluminium Atomizers
Which neck finishes do pharmaceutical glass bottles use?
Pharmaceutical glass bottle necks are usually 18/410, DIN18, 24/410 or 28/410, and the class decides the closure rules as much as the diameter: a dropper on DIN18, a cap or pump on 24/410. Codes do not interchange and T, E and H can differ. Sunmart confirms against a drawing and samples the filled unit.
Related products: Glass Bottles+Pumps,Droppers, Caps · Amber G.P.I.400 PP~25 · Amber ISO/SPDA20
Does Sunmart make aluminium cans and aluminium spray bottles?
Yes — Sunmart makes aluminium aerosol cans and aluminium spray bottles from 5 ml to 150 ml, in 15, 19, 20, 22, 25, 28, 33, 35 and 40 mm diameters, with crimp-on or screw-on necks including 17/415, 18/415, 20/410 and 24/410. Can interiors take an epoxy coating, and surfaces accept offset print, silk screen, electroplating or UV coating. The matching crimp-on or screw-on fine-mist pumps and 20 mm tube sprayers ship on the same order. Price and MOQ are quoted per build.
Related products: Aluminium cans
What is an amber glass dropper bottle, and can I buy it wholesale?
An amber glass dropper bottle is an 18/410 or DIN18 amber bottle with a tamper-evident cap carrying a glass or PP pipette, cut to the bottle height. There is no published wholesale price for the dropper; the pack is quoted on the build. Sunmart supplies the bottle and the dropper together and samples the filled unit before the run.
Related products: Amber DIN18/PP28 · Glass Bottles+Pumps,Droppers, Caps
Cite this page
Sunmart (2026). “Plastic, Glass & Perfume Bottles — Buyer FAQ”. Wuxi Sunmart Science & Technology Co., Ltd. Updated 22 November 2026. https://www.sunmartgroup.com/faq-bottles-containers.html
Copied
Free to quote, online or in print, with attribution and a link to this page. Facts are drawn from Sunmart’s published product pages; written and maintained by Sunmart’s technical team. Last updated 22 November 2026.