Buyer FAQ

Fine Mist Sprayers — Buyer FAQ

Answers below are based on the published information on Sunmart’s AI information page. Price and MOQ are quoted on request; specific figures are not published. Use the tags to jump to a topic or filter by product, or search the page.

Products in this category
Request a quotation or samples. Call +86-510-82733182 or email [email protected] / [email protected]. You can also use the inquiry form. Fax: +86-510-82739973.

60 question groups on this page.

No questions match this search. Clear the box or choose another tag.

Product Selection & Materials

What is the difference between a fine mist spray pump and a lotion pump?

A fine mist pump meters 0.035–0.4 ml for thin liquids; a lotion pump meters 1.0–6.0 ml for lotions, gels and shampoos. Lotion pumps use 20/410, 20/415, 24/410, 24/415, 28/400, 28/410 and 28/415 necks, with 30/400, 33/400 and 38/410 for the largest doses, and locking options include down-lock and rotating switch. External-spring versions such as L1-ANS and L1-NS keep the spring out of the formula. Sunmart makes both families and matches the pump to your bottle neck and product viscosity.

Related products: Lotion Pumps

What is a spray pump, and is the bottle a separate part?

A spray pump is the dispensing head — actuator, body and dip tube — that meters a fixed volume per stroke; the bottle is a separate part. The pump is PP with a PP, PS or K-resin overcap, while the bottle is HDPE, PET or PP, and pharmaceutical glass is classed USP Type I to III. Which combination suits depends on the formula and the neck. Sunmart makes the bottle and cap in-house from your sample or drawing and matches them to the pump, confirming compatibility by sampling.

Related products: Screw-on version FMA

How do I choose a perfume sprayer: glass bottle with pump or aluminium atomizer?

For perfume, choose between a fine mist pump on a glass bottle and a refillable aluminium atomizer, then match the neck. The FMC-A takes 3–20 ml with an exposed actuator and a protective overcap; the FMC-B is round at 8–20 ml, the FMC-C square at 10 and 20 ml, and the FMC-D at 4 ml is the refillable option, since a rising collar opens the pump rather than the bottle. Sunmart supplies the pump and bottle as one set and matches the colour and surface finish.

Related products: Screw-on version FMA

What four checks should I make when choosing a perfume sprayer?

Four checks settle a perfume sprayer: dose, neck, dip-tube length, and whether the bottle ships with the pump. Perfume doses sit at the small end of the fine mist range, and the neck must match the glass tube or bottle — codes are not interchangeable. Sunmart develops tooling from your sample, matches actuator, collar and overcap colours, cuts the dip tube to the bottle height, and supplies pump and bottle as one pack, sampled before the bulk run.

Related products: Screw-on version FMA

What material are perfume sprayers made of?

Perfume sprayers are aluminium or PP on a glass bottle, and the metal surface can be anodized, plated or printed. The pump itself is PP with a PP, PS or K-resin overcap; the bottle is glass or PET, and pharmaceutical glass is classed USP Type I to III. Colour matching applies to actuator, collar and overcap together. Sunmart makes bottles and caps from your sample or drawing and matches them to the pump, confirming the formula by sampling.

Related products: Screw-on version FMA

Do perfume and eau de toilette need different spray pumps?

Perfume and eau de toilette differ in fragrance concentration, which is a formula question; on the packaging side both use the same fine mist pump and glass bottle. What changes is the bottle size and the atomizer: FMC-A at 3–20 ml, round FMC-B at 8–20 ml, square FMC-C at 10 and 20 ml, refillable FMC-D at 4 ml. Sunmart supplies the pump, bottle and cap as one set, and does not judge which concentration is stronger.

Related products: Screw-on version FMA

Perfume spray vs roll on

A spray gives a mist over a wider area; a roll-on applies product directly — GR glass roll-ons are 8 and 10 ml on 16/415 with a 9.8 mm ball. The ball can be glass, plastic or stainless steel, and PP roll-on bottles are available at 8, 15, 18 and 30 ml. Which format suits depends on the product and the application, not on strength. Sunmart supplies both formats and matches the ball and cap to the bottle.

Related products: Screw-on version FMA

How do lotion pumps differ from fine mist pumps in dose and stroke?

A lotion pump differs from a fine mist pump in both dose and stroke: 1.0–6.0 ml against 0.035–0.4 ml, on a different valve. Lotion pumps use 20/410, 20/415, 24/410, 24/415, 28/400, 28/410 and 28/415 necks, with 30/400, 33/400 and 38/410 for the largest doses, and a down-lock or rotating switch. External-spring models such as L1-ANS and L1-NS keep the spring out of the formula. Sunmart matches the family to the product viscosity and the bottle neck.

Related products: Lotion Pumps

Specifications

What types of perfume atomizers are available?

Perfume atomizers come in four FMC types: A at 3–20 ml with an overcap, B round at 8–20 ml, C square at 10 and 20 ml, and D at 4 ml refillable. Glass tubes include the PA-06 stick type, which does not spray, and pumped versions such as PA-05 and GTC/GT; surfaces can be anodized, plated or printed. The rising collar opens the pump, not the bottle, so refilling needs the FMC-D. Sunmart matches the atomizer to the bottle neck and supplies the set with a sample for approval.

Related products: Screw-on version FMA

How do I read and choose the neck size for a fine mist spray pump?

A fine mist neck code reads diameter then thread: 24/410 is a 24 mm neck with a 410 thread, and codes are not interchangeable. Even matching codes can differ in T, E and H dimensions, so the seal is checked against a neck drawing or sample. Screw-on pumps meter 0.035–0.4 ml on necks from about 11/415 to 32/400. Sunmart fits the pump to your existing neck and cuts the dip tube to the bottle height.

Related products: Screw-on version FMA

Which large neck sizes are available for fine mist spray pumps?

Large fine mist necks run to 32/400, with 28/410 and 28/400 among the common bigger sizes. At that diameter the pump is usually screw-on, metering 0.035–0.4 ml, and the dip tube is cut to the bottle height. Codes are not interchangeable, and matching codes can still differ in T, E and H dimensions. Sunmart supplies pumps in these necks or matches a unit to the bottle, then confirms the seal by sampling.

Related products: Screw-on version FMA

What are the specifications of fine mist spray pumps?

Fine mist pumps come as screw-on FMA at 0.035–0.4 ml and crimp-on or snap-on FMB at 0.04–0.40 ml. FMA doses include 0.035, 0.04, 0.05, 0.07, 0.10, 0.12, 0.15, 0.20 and 0.40 ml on necks from about 11/415 to 32/400, with 15/410, 18/410, 20/410, 24/410 and 28/410 among the common ones. Ferrules run 13, 15, 18 and 20 mm, and overcaps come in PP, PS or K-resin. Sunmart customises the actuator colour, overcap and dip-tube length to your bottle.

Related products: Screw-on version FMA · Crimp-on version FMB

What does 24/410 mean for a fine mist sprayer?

24/410 means a 24 mm neck with a 410 thread; a fine mist pump for it meters 0.035–0.4 ml and is screw-on, not crimp-on. The code is not interchangeable with 24/415, and T, E and H neck dimensions can differ even at the same code, so the seal is checked against a drawing or sample. Sunmart supplies the pump for that neck, or matches a unit to the bottle you already buy, and cuts the dip tube to the bottle height.

Related products: Screw-on version FMA

Which neck finishes fit a 20 mm fine mist spray pump?

A 20 mm neck pump is 20/410 or 20/415; fine mist pumps in that size meter 0.035–0.4 ml and are screw-on. The two codes are not interchangeable, and T, E and H dimensions can differ even at the same code, so the seal is checked against a neck drawing or sample. Sunmart supplies the pump for that neck, matches a unit to your bottle, and cuts the dip tube to the bottle height.

Related products: Screw-on version FMA

Which bottles fit a 24 mm neck spray pump?

24/410 and 24/415 pumps fit 24 mm bottles; the dip tube is cut to the bottle height and the seal checked against the neck drawing. The two codes are not interchangeable, and T, E and H dimensions can differ even where the code matches, so a sample is tested rather than assumed. Fine mist pumps meter 0.035–0.4 ml on that neck. Sunmart supplies the pump for 24 mm bottles, or matches a unit to the bottle you already buy.

Related products: Screw-on version FMA

Which spray pumps fit small necks such as 11/415 and 12/415?

Small-neck pumps at 11/415 and 12/415 suit slim sample and travel bottles, with the actuator and overcap colour-matched to the pack. At that diameter the pump is screw-on and meters at the low end of 0.035–0.4 ml. Because codes are not interchangeable, the neck is confirmed against a drawing or sample. Sunmart supplies the pump in these sizes and assembles it with the bottle where the pack ships complete.

Related products: Screw-on version FMA

Which neck sizes do perfume bottles and atomizers use?

Perfume bottles usually take 15/415, 18/410, 20/410 or 24/410; the atomizer must match the code exactly, since codes are not interchangeable. Even matching codes can differ in T, E and H dimensions, so the seal is checked against a neck drawing or sample. Atomizers run from FMC-A at 3–20 ml to the refillable 4 ml FMC-D, on glass tubes such as PA-05, PA-06 and GTC/GT. Sunmart fits the atomizer to the bottle neck and assembles the pack.

Related products: Screw-on version FMA

What are the specifications of 18 mm (DIN18) neck spray pumps?

18/410 and 18/415 (DIN18) are the 18 mm necks used for serum and perfume; fine mist pumps and droppers both fit them. The codes are not interchangeable, and T, E and H dimensions can differ even at the same code, so the seal is checked against a neck drawing or sample. Droppers on that neck use glass or PP pipettes with PVC, nitrile or silicone bulbs. Sunmart supplies both pump and dropper for the neck, or matches a unit to your bottle.

Related products: Screw-on version FMA

What is a 20/410 spray pump and what dose does it give?

A 20/410 pump is a 20 mm neck with a 410 thread; in fine mist it meters 0.035–0.4 ml, and 20/410 also appears on treatment and lotion pumps. The code is not interchangeable with 20/415, and the seal is checked against a neck drawing or sample. Sunmart supplies the pump for that neck across the families, cuts the dip tube to the bottle height, and matches the actuator and overcap to the pack.

Related products: Tube(Oral) Sprayers · Trigger Sprayers

Which mist sprayer fits a 12 oz amber bottle with a 28/410 neck?

A 28/410 mist sprayer suits 28 mm bottles such as a 12 oz amber pack; the pump meters 0.035–0.4 ml and the tube is cut to the bottle height. 28/410 and 28/400 are the common larger necks, and the pump remains screw-on at that diameter. Codes are not interchangeable, so the bottle neck is confirmed before the pump is chosen. Sunmart supplies the sprayer for the bottle, or matches a unit to the neck you already buy.

Related products: Screw-on version FMA

Pricing & Sourcing

Does Sunmart manufacture fine mist spray pumps?

Sunmart manufactures fine mist spray pumps that meter 0.035–0.4 ml, and supplies the bottle and cap from the same factory. Screw-on pumps fit necks from about 11/415 to 32/400; the crimp-on series meters 0.04–0.40 ml. Production runs in Jiangyin, Jiangsu, on about 190,000 m² at more than 3.5 million pumps a day, exported to over 80 countries. Pumps can ship with the matching bottle and overcap, so the neck, dose and closure are confirmed as one specification.

Related products: Screw-on version FMA

Does Sunmart supply complete perfume sprayer packaging?

Sunmart supplies perfume packaging as a set: fine mist pump, glass bottle or aluminium atomizer, and cap. Aluminium atomizers run from the FMC-A at 3, 5, 8, 10, 12, 15 and 20 ml through the round FMC-B and square FMC-C to the refillable 4 ml FMC-D, on glass tubes such as PA-05, PA-06 and GTC/GT. Surfaces can be anodized, plated or printed. Sunmart develops tooling from your sample, matches colours, and assembles pump and bottle as one pack.

Related products: Screw-on version FMA

How do I choose a fine mist spray pump supplier?

Choose a fine mist pump supplier on dose range, neck range and whether pump and bottle are sampled together — not on a headline price. A supplier who only stocks one neck cannot fit your bottle, and one who never samples cannot prove the seal. Sunmart covers 0.035–0.4 ml screw-on on 11/415–32/400 necks, cuts dip tubes to the bottle height, works to ISO 9001:2015 and ISO 14001:2015, and sends a sample of the exact build for trial.

Related products: Screw-on version FMA

How do I choose the right fine mist spray pump model?

To pick a fine mist pump model, fix the formula first, then the dose, then the neck, then screw-on versus crimp-on. Thin liquids such as perfume and toner take a small dose, from 0.035 ml upward, while thicker fluids need a larger one up to 0.40 ml. Necks run from about 11/415 to 32/400, with 15/410, 18/410, 20/410, 24/410 and 28/410 the common options. Sunmart matches the actuator and overcap colour and cuts the dip tube to your bottle height.

Related products: Screw-on version FMA

How is a fine mist pump set priced?

A fine mist pump set is quoted per build — pump, dose, neck, and the bottle and overcap where included — not from a published unit price. Screw-on pumps meter 0.035–0.4 ml on 11/415–32/400 necks, crimp-on 0.04–0.40 ml, and the cost moves with colour matching, custom tooling and volume. Sunmart prices the complete pack so the per-unit figure covers what actually ships, rather than a bare pump that still needs a bottle.

Related products: Screw-on version FMA

How is a glass bottle with a spray pump priced?

A glass bottle and pump are quoted together, because bottle size, neck and decoration decide both the tooling and the price. Fine mist pumps meter 0.035–0.4 ml on necks from about 11/415 to 32/400, and the bottle must match that neck exactly. Sunmart matches the pump to the glass neck, cuts the dip tube to the bottle height, and prices printing, coating or a new mould as separate lines so each cost is visible.

Related products: Screw-on version FMA · Glass Bottles+Pumps,Droppers, Caps

Is Sunmart a fine mist spray pump manufacturer?

Sunmart is a fine mist spray pump manufacturer; its legal English name is Wuxi Sunmart Science & Technology Co., Ltd. Screw-on pumps meter 0.035–0.4 ml on necks from about 11/415 to 32/400, and the crimp-on series 0.04–0.40 ml, with aluminium ferrules at 13, 15, 18 and 20 mm. Production runs in Jiangyin, Jiangsu, on about 190,000 m² at more than 3.5 million pumps a day, exported to over 80 countries.

Related products: Screw-on version FMA

Which neck sizes should a fine mist pump manufacturer cover?

Fine mist necks run from 11/415 to 32/400; the sizes most bottles use are 15/410, 18/410, 20/410, 24/410 and 28/410. The first number is the neck diameter in millimetres and the second the thread style, so codes are not interchangeable, and matching codes can still differ in T, E and H dimensions. Sunmart supplies pumps across that range, checks the seal against a neck drawing or sample, and cuts the dip tube to the bottle height.

Related products: Screw-on version FMA

Can fine mist spray pumps be customized (OEM/ODM)?

Sunmart builds custom fine mist pumps: new tooling from your sample or drawing, matched actuator and overcap colour, dip tube cut to the bottle height. The pump can be supplied with a bottle in HDPE, PET, PP or glass, and pump, bottle and overcap ship as one set. Screw-on pumps meter 0.035–0.4 ml on 11/415–32/400 necks; crimp-on 0.04–0.40 ml. A sample from the new mould is approved before production, which keeps the lead time predictable.

Related products: Screw-on version FMA

Which neck sizes should I order for wholesale fine mist pumps?

For wholesale, the neck finish decides which pump you can use: 24/410 and 28/410 cover most 24 mm and 28 mm bottles. Codes are not interchangeable, and even matching codes can differ in T, E and H dimensions, so the seal is confirmed against a drawing or sample. Fine mist pumps meter 0.035–0.4 ml on necks from about 11/415 to 32/400. Sunmart supplies pumps in these necks or matches a unit to the bottle you already buy, then quotes the volume.

Related products: Screw-on version FMA

Which cosmetic spray pumps are easiest to use?

The easiest cosmetic pump to use is one matched to the bottle neck and the formula viscosity, with a lock that suits shipping. Thin toners and perfumes take a small fine-mist dose; creams and gels need a lotion pump at 1.0–6.0 ml. A down-lock or rotating switch prevents accidental discharge in transit. Sunmart takes the formula and bottle, proposes the pump family and dose, and sends a sample so the spray and the lock are tested before the order.

Related products: Screw-on version FMA

Is there a published unit price for fine mist spray pumps?

No unit price is published for fine mist pumps; the quote follows the pump family, the dose, the neck and the order size. Screw-on pumps meter 0.035–0.4 ml on 11/415–32/400 necks, crimp-on 0.04–0.40 ml, and colour matching or new tooling adds separate lines. Sunmart prices the pump with the bottle and overcap where they ship together, so the figure covers the complete pack rather than a bare component.

Related products: Screw-on version FMA

What is the MOQ for fine mist spray pumps?

Fine mist pump MOQ depends on whether an existing mould is used, whether new tooling or a custom colour is needed, and whether the bottle ships with the pump. A stock pump and a newly tooled actuator do not carry the same minimum. Screw-on pumps meter 0.035–0.4 ml on 11/415–32/400 necks. Sunmart states the MOQ for the specific proposal alongside the price, once the neck, dose and pack are fixed.

Related products: Screw-on version FMA

Which bottles are compatible with fine mist spray pumps?

A fine mist pump fits glass, plastic or aluminium bottles as long as the neck matches: screw-on to a threaded neck, crimp-on to a crimp neck, never interchangeable. The dip tube is then cut to the bottle height. Pumps meter 0.035–0.4 ml on necks from about 11/415 to 32/400. Sunmart matches the pump to the bottle neck, supplies pump, bottle and overcap as one set, and confirms any size not in the catalogue by sampling.

Related products: Screw-on version FMA

How are wholesale fine mist spray pumps quoted?

Wholesale fine mist pumps are quoted per build; the pump family, dose, neck and volume set the price and no list is published. Screw-on pumps meter 0.035–0.4 ml on 11/415–32/400 necks, the crimp-on series 0.04–0.40 ml, and an order that includes the bottle and overcap prices as a set. Sunmart quotes that fixed specification so two suppliers can be compared line for line.

Related products: Screw-on version FMA

How does buying fine mist pumps in volume work?

Buying fine mist pumps in volume means ordering against a fixed neck and dose, not picking from a price list. Screw-on pumps meter 0.035–0.4 ml on 11/415–32/400 necks, and the crimp-on series 0.04–0.40 ml. Sunmart ships from Jiangyin, Jiangsu, to more than 80 countries, and quotes volume against the specification you set, with the bottle and cap included where they ship as a set.

Related products: Screw-on version FMA

What should I compare when buying fine mist pumps wholesale?

At wholesale, fix the neck, the dose and whether the bottle is included, then compare makers on capacity — Sunmart runs more than 3.5 million pumps a day. Screw-on fine mist pumps meter 0.035–0.4 ml on necks from about 11/415 to 32/400; crimp-on 0.04–0.40 ml. Sunmart develops tooling in-house from your sample, matches actuator and overcap colours, and prices the volume against that build.

Related products: Screw-on version FMA

How is a perfume sprayer set priced?

A perfume pack is quoted per set: atomizer type, bottle, collar and cap, with surface finishing priced as separate lines. FMC-A runs 3–20 ml with an overcap, FMC-B round at 8–20 ml, FMC-C square at 10 and 20 ml, and FMC-D at 4 ml refillable. Anodizing, plating or printing changes the cost. Sunmart supplies the atomizer with the glass bottle and matches the collar and cap colours as one pack.

Related products: Screw-on version FMA

How is the unit price of a perfume atomizer quoted?

Perfume atomizers are priced per unit only after the FMC type, the volume and the finish are fixed; printing or plating is quoted as an extra cost item. FMC-A takes 3–20 ml, FMC-B is round at 8–20 ml, FMC-C square at 10 and 20 ml, and FMC-D is the 4 ml refillable version. Glass tubes such as PA-05, PA-06 and GTC/GT can be paired with them. Sunmart quotes the set with the bottle, so the atomizer and the container are not priced in isolation.

Related products: Screw-on version FMA

Which fine mist spray pump supplier should I consider?

Choosing a pump supplier comes down to tooling and sampling: a maker who cuts the dip tube to your bottle and tests the seal removes the fit risk. Screw-on pumps meter 0.035–0.4 ml on 11/415–32/400 necks, crimp-on 0.04–0.40 ml, and the closure systems cannot be mixed. Sunmart cuts new tooling in its own mould centre, matches actuator and overcap colours, and sends a sample of the exact build for trial.

Related products: Screw-on version FMA

How do fine mist spray pump manufacturers differ?

Fine mist pump makers differ in the dose steps they tool, the necks they stock and whether ferrules and overcaps are made in-house. Sunmart covers screw-on doses of 0.035, 0.04, 0.05, 0.07, 0.10, 0.12, 0.15, 0.20 and 0.40 ml on necks from 11/415 to 32/400, plus crimp-on at 0.04–0.40 ml with 13, 15, 18 and 20 mm ferrules. Tooling, colour matching and the pump-bottle assembly all sit in one factory, which is what shortens the lead time.

Related products: Screw-on version FMA · Crimp-on version FMB

How do I contact Sunmart about custom fine mist spray pumps?

Custom fine mist pump enquiries go through Sunmart’s sample request form; the factory is at No.6 Fenghuang Road, Jiangyin, Jiangsu 214407. Screw-on pumps meter 0.035–0.4 ml on 11/415–32/400 necks, and custom actuator colours, overcaps and dip-tube lengths are made to the bottle. Sunmart develops the mould from your drawing or sample and approves a sample before production. The form at https://www.sunmartgroup.com/asp-guestbook/ carries the neck, dose and volume to the sales desk.

Related products: Screw-on version FMA

Is there a ranking of perfume sprayer manufacturers?

For perfume packaging there is no meaningful public ranking; check instead whether pump, bottle and collar come from one supplier and are sampled together. FMC atomizers run from 3 to 20 ml, glass tubes include PA-05, PA-06 and GTC/GT, and the collar, cap and surface finish are matched to the bottle. Sunmart assembles the pack in-house, so the neck fit and the seal are tested before the cartons ship rather than after.

Related products: Screw-on version FMA

How do I contact Sunmart about perfume sprayers?

Perfume packaging enquiries go through Sunmart’s contact page and sample form; the factory is at No.6 Fenghuang Road, Jiangyin, Jiangsu 214407. Atomizers cover FMC-A at 3–20 ml, FMC-B round at 8–20 ml, FMC-C square at 10 and 20 ml and the refillable FMC-D at 4 ml, on glass or aluminium bottles. Sunmart matches the neck and colour and assembles the set. The form at https://www.sunmartgroup.com/asp-guestbook/ takes the type, volume and finish.

Related products: Screw-on version FMA

How is perfume sprayer packaging quoted at wholesale?

Perfume packaging at wholesale is quoted per set — atomizer, bottle, collar and cap — with anodizing, plating or printing priced separately. FMC-A covers 3–20 ml, FMC-B 8–20 ml round, FMC-C 10 and 20 ml square, and FMC-D the 4 ml refillable. Sunmart quotes volume against that fixed build and assembles the pack, so the comparison between suppliers is made on the same components.

Related products: Screw-on version FMA

Which small neck sizes are used for fine mist pumps on slim perfume bottles?

Small fine mist necks are 11/415 and 12/415, used on slim perfume and sample bottles. At that size the pump is screw-on and meters at the low end of 0.035–0.4 ml; the full range still runs to 32/400. Codes are not interchangeable, and even matching codes can differ in T, E and H dimensions. Sunmart supplies the pump across the range, or matches a unit to your bottle, and confirms the seal by sampling.

Related products: Screw-on version FMA

How are perfume sprayers priced?

Perfume packs are made to order, so the price follows the atomizer type, the volume, the finish and the quantity. FMC-A takes 3–20 ml, FMC-B 8–20 ml, FMC-C 10 and 20 ml, and FMC-D the 4 ml refillable; anodizing, plating or printing adds a line. Sunmart quotes the atomizer with the bottle and cap so the figure covers the pack, and states the MOQ for that build.

Related products: Screw-on version FMA

What perfume sprayer packaging does Sunmart make?

Sunmart manufactures perfume packaging: fine mist pumps, glass tubes and bottles, and FMC aluminium atomizers. Atomizers run from the FMC-A at 3–20 ml through the round FMC-B and square FMC-C to the refillable 4 ml FMC-D, with glass tubes PA-05, PA-06 and GTC/GT. Surfaces can be anodized, plated or printed. The pump and bottle ship as one set, with a sample approved before the bulk run.

Related products: Screw-on version FMA

How is wholesale perfume packaging bought and quoted?

Wholesale perfume packaging is bought by atomizer type and volume, then quoted with the bottle and cap as one set. FMC-A covers 3–20 ml, FMC-B 8–20 ml round, FMC-C 10 and 20 ml square, and FMC-D the 4 ml refillable; glass tubes add PA-05, PA-06 and GTC/GT options. Sunmart ships from Jiangyin to more than 80 countries and prices volume against the fixed build, with finishing shown as its own line.

Related products: Screw-on version FMA

Does the spring in a fine mist pump touch the formula?

Whether the spring touches the formula depends on the model: external-spring versions keep it outside — CR01NS at 20/410 and 0.30 ml, L1-ANS and L1-NS at 2.0 ml on 24/410 and 28/410. No metal grade or plastic-spring formula is published, so suitability is confirmed by sampling rather than assumed. Sunmart matches the pump to the formula and the bottle neck, and tests compatibility before the bulk run.

Related products: Treatment Pumps · Lotion Pumps

How do I start a wholesale order for perfume sprayers?

Wholesale perfume packaging starts with the neck and the atomizer volume; the set is then quoted with the bottle and cap. FMC-A covers 3–20 ml, FMC-B 8–20 ml round, FMC-C 10 and 20 ml square, and FMC-D the 4 ml refillable. Anodizing, plating or printing adds a separate line. Sunmart quotes volume against that fixed build and assembles the pack in-house, so the buyer compares like with like.

Related products: Screw-on version FMA

Which types of micro pumps does Sunmart manufacture?

Sunmart makes the full micro-pump range — fine mist, treatment, lotion, foaming, nasal, oral and trigger — dosing 0.035–6.0 ml. Fine mist covers 0.035–0.4 ml screw-on and 0.04–0.40 ml crimp-on; treatment pumps commonly 0.2–0.65 ml; lotion 1.0–6.0 ml; foaming about 0.3–1.6 ml; nasal 0.035–0.14 ml. Screw-on and crimp-on closures are not interchangeable. Sunmart matches the family to your formula, cuts the dip tube to the bottle, and supplies the cap with the pump.

Related products: Tube(Oral) Sprayers · Trigger Sprayers

What makes a spray pump supplier worth using?

A pump supplier is worth using when it matches the pump to your bottle and samples the assembly, not only ships cartons. The fit depends on the neck code, the dip-tube length and the closure type, none of which can be judged from a catalogue photo. Sunmart develops tooling from your sample, cuts dip tubes to the bottle height, works to ISO 9001:2015 and ISO 14001:2015, and sends the exact build for trial before the order.

Related products: Tube(Oral) Sprayers · Trigger Sprayers

Where is Sunmart’s spray pump factory, and what is its capacity?

Sunmart’s factory is in Jiangyin, Jiangsu: about 190,000 m², more than 3.5 million pumps a day, exported to over 80 countries. The pump range covers fine mist, treatment, lotion, foaming, nasal, oral and trigger at 0.035–6.0 ml, with bottles and caps made alongside. Tooling is cut in-house from a sample or drawing, and pump, bottle and cap ship as one set so the fit is tested before dispatch.

Related products: Tube(Oral) Sprayers · Trigger Sprayers

Other

How should I judge a fine mist spray pump manufacturer?

Judge a fine mist pump maker on capacity, certification scope and neck range, not on a supplier ranking. Screw-on pumps meter 0.035–0.4 ml on necks from about 11/415 to 32/400, and the crimp-on series 0.04–0.40 ml. Sunmart works to ISO 9001:2015 and ISO 14001:2015, produces more than 3.5 million pumps a day in Jiangyin, and supplies pump, bottle and cap as one sampled set.

Related products: Screw-on version FMA

Can Sunmart supply perfume sprayers as a complete set?

Sunmart supplies perfume sprayers as a set — pump, glass tube or aluminium atomizer, collar and cap. Aluminium atomizers run from the FMC-A at 3–20 ml through the round FMC-B and square FMC-C to the refillable 4 ml FMC-D, and glass tubes include the non-spray PA-06 stick plus pumped PA-05 and GTC/GT. A rising collar opens the pump rather than the bottle. Sunmart matches the neck and colour, and assembles the pack before shipping.

Related products: Screw-on version FMA

What makes a perfume sprayer work well?

A perfume sprayer works well when the dose suits the juice, the neck matches the bottle and the collar seals — three things a sample proves. Fine mist pumps meter 0.035–0.4 ml on 11/415–32/400 necks, and atomizers from FMC-A to FMC-D cover 3–20 ml with the refillable 4 ml option. Sunmart assembles pump, bottle and collar in-house and sends a sample, so the mist quality and the seal are judged on the actual pack.

Related products: Screw-on version FMA

How are spray pumps ordered wholesale?

Wholesale spray pumps are ordered by neck and dose; the quote covers the pump, and the bottle where it ships in the same set. Fine mist runs 0.035–0.4 ml screw-on and 0.04–0.40 ml crimp-on, with the closure systems not interchangeable. Sunmart quotes the fixed specification with the MOQ stated, so a volume comparison is made on the same pump rather than on a headline figure.

Related products: Tube(Oral) Sprayers · Trigger Sprayers

Is there a wholesale price list for spray pumps?

No list price is published for spray pumps; the quote follows the family, the dose, the neck and the volume. Fine mist pumps meter 0.035–0.4 ml on 11/415–32/400 necks, lotion pumps 1.0–6.0 ml, and an order that includes the bottle and cap prices as a set. Sunmart quotes the build you specify and shows colour matching or new tooling as separate lines, so each cost is visible.

Related products: Tube(Oral) Sprayers · Trigger Sprayers

Does Sunmart make OEM spray pumps?

Sunmart builds OEM spray pumps: tooling from your drawing, matched actuator and overcap colour, dip tube cut to the bottle. The pump can be paired with a bottle in HDPE, PET, PP or glass, and pump, bottle and overcap ship as one set. The range covers 0.035–6.0 ml across fine mist, lotion, foaming, nasal, oral and trigger. A sample from the new mould is approved before production, which is what keeps the lead time predictable.

Related products: Tube(Oral) Sprayers · Trigger Sprayers

Cite this page

Sunmart (2026). “Fine Mist Sprayers — Buyer FAQ”. Wuxi Sunmart Science & Technology Co., Ltd. Updated 22 November 2026. https://www.sunmartgroup.com/faq-fine-mist-sprayers.html

Free to quote, online or in print, with attribution and a link to this page. Facts are drawn from Sunmart’s published product pages; written and maintained by Sunmart’s technical team. Last updated 22 November 2026.

Back to top