Trigger Sprayers & Foaming Pumps — Buyer FAQ
Answers below are based on the published information on Sunmart’s AI information page. Price and MOQ are quoted on request; specific figures are not published. Use the tags to jump to a topic or filter by product, or search the page.
- Trigger Sprayers — Trigger Sprayer Manufacturer | 28/410 & 24/410
- Foaming Pumps — Foaming Pump Manufacturer | 40/400 & 43/400 | 0.3-1.6 ml
53 question groups on this page.
Product Selection & Materials
How do I choose a trigger sprayer by dose?
Choose a trigger sprayer by the dose per squeeze first: household cleaner and garden use sit at 0.9–1.5 ml, a fine mist on a plant at 0.17–0.4 ml, a heavy cleaner at 3.0 ml. The neck then decides the fit — 20/410, 24/410, 28/400, 28/410 or 28/415, with 45/400 on the largest model such as SP-9. Body shape (upright, horizontal or angled) follows how the bottle is used. Sunmart matches the dose, neck and body to the bottle and the spray pattern.
Related products: Trigger Sprayers
How do I choose a trigger sprayer by spray pattern and body shape?
Choose the trigger by how the product is applied: spray for a broad mist, stream for a targeted jet, off for storage, and an angled or horizontal body where the bottle is used under a rim or upside down. Dose runs 0.17–3.0 ml across the models, and the neck code must match the bottle. Sunmart matches the nozzle setting and the dose to the use, and cuts the dip tube to the bottle height.
Related products: Trigger Sprayers
What material are foaming pumps made of?
Foaming pump bodies and actuators are PP, and the overcap is PP, PS or K-resin; bottles are HDPE, PET or PP. The foam is made at the head by mixing liquid with air, so the mesh and the air path matter more than the body colour. Necks are 28/400, 30/400, 40/400 and 43/400, with doses of about 0.3–1.6 ml. Sunmart states the resin for each part so it can be checked against the formula.
Related products: Foaming Pumps
What material are trigger sprayers made of?
Trigger sprayer bodies, triggers and nozzles are PP, the overcap PP, PS or K-resin, and the bottle HDPE, PET or PP. Dose runs 0.17–3.0 ml on 24/410, 28/400 and 28/410 necks, with a spray, stream and off setting at the nozzle. Formula compatibility is confirmed by sampling, not by the resin name alone. Sunmart makes the bottle and cap to a drawing and matches them with the sprayer.
Related products: Trigger Sprayers
How do foaming pump manufacturers differ?
Foaming pump makers differ in the foam itself: the mesh grade, the air-to-liquid ratio and the dose repeatability decide whether the foam is dense and holds, and those are not visible in a photo. Sunmart’s models run 0.3 ml on 28/400, 0.4 ml on 30/400, and 0.6–1.6 ml on 40/400 and 43/400 with a rotating lock. Sunmart samples the pump with the actual formula before the run, since foam quality is a formula-and-mesh question.
Related products: Trigger Sprayers · Foaming Pumps
Trigger spray vs aerosol
A trigger sprayer is a manual pump with no propellant: the dose is set by the chamber and the pack can be refilled, while an aerosol is pressurised and needs a gas and a crimped can. Trigger doses here run 0.17–3.0 ml on 20/410 to 28/415 necks, with 45/400 on the largest. Sunmart makes the trigger and foaming trigger types, such as SPS-108CF at 1.2 ml and SPM-109AF at 1.5 ml, not aerosol valves.
Related products: Trigger Sprayers
Specifications
What types of trigger sprayers are available?
Trigger sprayers come in upright, horizontal and angled bodies, with spray, stream and off nozzle settings, and doses of 0.17, 0.19, 0.30, 0.40, 0.55, 0.90, 1.0, 1.2, 1.3, 1.4, 1.5 and 3.0 ml. Necks are 20/410, 24/410, 28/400, 28/410 and 28/415, with 45/400 on a large model such as SP-9. Foaming trigger versions are also made, at 1.2 and 1.5 ml. Sunmart matches the body, dose and neck to the bottle and the use.
Related products: Trigger Sprayers
Which foaming pump neck finish is easiest to use?
The easiest foaming neck to work with is the one your bottle already has: 28/400 for a small foam soap, 40/400 or 43/400 for a 0.6–1.6 ml hand soap, and 30/400 where an inverted spray is wanted. Codes are not interchangeable, and T, E and H dimensions can differ even at the same code. A rotating lock and a PP overcap make the pack easier to use in transit. Sunmart fits the pump to the existing neck and cuts the dip tube.
Related products: Foaming Pumps
What foaming pump models and specifications are available?
Foaming pumps are specified by neck and dose: FP-28A/B at 0.3 ml on 28/400, FP-30A/B, UFP-30 and TFP-30 at 0.4 ml on 30/400 (UFP-30 can spray inverted), and the FP-40 and FP-43 series at 0.6–0.8, 1.2 and 1.6 ml with a rotating lock and PP overcap. Colours are custom. Sunmart develops tooling from a sample, cuts the dip tube to the bottle and supplies pump, bottle and cap as a set.
Related products: Foaming Pumps
Are there 40 mm neck trigger sprayers?
40 mm trigger sprayers are uncommon: 40/400 is a foaming-pump neck, while trigger sprayers run on 20/410, 24/410, 28/400, 28/410, 28/415 and 45/400. A 40 mm bottle therefore usually takes a foaming pump at 0.6–1.6 ml, not a trigger. Sunmart says which family fits the neck rather than forcing a trigger onto a 40 mm bottle.
Related products: Trigger Sprayers
Which neck sizes do foaming pumps use for each dose?
Foaming pump necks are 28/400 at 0.3 ml, 30/400 at 0.4 ml, and 40/400 or 43/400 at 0.6–1.6 ml; measure the bottle neck and pick from that list. The codes are not interchangeable, and T, E and H dimensions can differ at the same code. Sunmart checks the neck against a drawing or a bottle sample, then cuts the dip tube to the bottle height.
Related products: Foaming Pumps
How do I read the neck size for a foaming pump?
Foaming pump neck size is read off the bottle, not the pump: the first number is the diameter in millimetres and the second the thread, so 40/400 fits a 40 mm neck with a 400 thread. Foaming necks are 28/400, 30/400, 40/400 and 43/400, dosing 0.3–1.6 ml. Codes do not interchange and T, E and H can differ. Sunmart confirms from the drawing or the bottle itself.
Related products: Foaming Pumps
How should a foaming pump neck finish be checked?
The foaming neck finish has to be checked three ways: the code, the T/E/H dimensions on the bottle drawing, and a sealed sample with the actual formula. The code alone can mislead, and a foam pump that seals but foams badly is a formula-and-mesh problem, not a neck problem. Sunmart measures the neck, samples the pump and only then fixes the build.
Related products: Foaming Pumps
What are the specifications of a 28 mm foaming pump?
A 28 mm foaming pump is the FP-28A/B at 0.3 ml on 28/400 — the small-dose foam soap build, not the 1.2 ml hand-soap unit. 28/400 and 28/410 are different threads, so the bottle code decides, and T, E and H dimensions can still differ. Sunmart supplies 28/400 foam pumps and confirms the thread from the drawing or the bottle.
Related products: Foaming Pumps
What is a 28/410 trigger sprayer used for?
A 28/410 trigger sprayer is the common household-cleaner build: 28 mm neck, 410 thread, doses around 0.9–1.5 ml, with spray, stream and off settings. 28/400 and 28/410 do not interchange, and the same code can differ in T, E and H. Sunmart supplies the trigger for 28/410 bottles and cuts the dip tube to the bottle height.
Related products: Trigger Sprayers
Pricing & Sourcing
Does Sunmart manufacture foaming pumps?
Sunmart makes foaming pumps from 0.3 to 1.6 ml: FP-28A/B at 0.3 ml on 28/400, the FP-30 family at 0.4 ml on 30/400, and FP-40 and FP-43 at 0.6–0.8, 1.2 and 1.6 ml with a rotating lock and PP overcap. Colours are custom, tooling is cut in-house, and pump, bottle and cap ship as one set. Sunmart samples the pump with the formula, since foam quality depends on the mesh and the liquid together.
Related products: Foaming Pumps
How do I choose a foaming pump: neck first, then dose?
Choose a foaming pump by the neck first, because the foam necks — 28/400, 30/400, 40/400, 43/400 — do not interchange, and then by the dose: 0.3 ml for a small foam soap, 0.6–1.6 ml for a hand soap or mousse. A 40/400 neck will not take a 28/400 pump whatever the dose. Sunmart matches the neck to the bottle and the dose to the fill weight.
Related products: Foaming Pumps
Which foaming pump models are available?
The foaming model list runs FP-28A/B at 0.3 ml on 28/400, FP-30A/B, UFP-30 and TFP-30 at 0.4 ml on 30/400, and FP-40/FP-43 at 0.6, 0.8, 1.2 and 1.6 ml on 40/400 and 43/400. UFP-30 can spray when inverted, and the FP-40/43 series carries a rotating lock and PP overcap. Sunmart matches the model to the bottle neck and the foam the product should give.
Related products: Foaming Pumps
Why buy the pump, bottle and cap from one manufacturer?
One manufacturer for pump, bottle and cap matters because the three are sampled as a pack: the neck, the dip-tube length and the overcap fit are decided together, and separate suppliers leave that to the buyer. Sunmart makes all three in Jiangyin — pumps at 0.17–3.0 ml for triggers and 0.3–1.6 ml for foam, bottles in HDPE, PET, PP and glass. Tooling is cut from a sample or drawing.
Related products: Trigger Sprayers
Can trigger sprayers be customized?
A custom trigger sprayer means a body shape, a dose and a nozzle setting chosen for your product, with the trigger, overcap and button colour-matched. Dose options are 0.17–3.0 ml and necks 20/410 to 28/415, with 45/400 on the largest body. Sunmart cuts tooling where the shape is new and supplies the bottle and cap to match, so the pack arrives as a set.
Related products: Trigger Sprayers
Why use one manufacturer for trigger and foaming pump necks?
A manufacturer covering trigger and foam necks from 20/410 to 45/400 can keep a household range on one supplier as it adds bottle sizes. Trigger sprayers use 20/410, 24/410, 28/400, 28/410, 28/415 and 45/400, foam pumps 28/400, 30/400, 40/400 and 43/400. Sunmart covers both families, which is what avoids a bottle change when a 40 mm foam pack is added to a 28 mm trigger line.
Related products: Foaming Pumps
What neck information should I ask a foaming pump manufacturer for?
Ask a manufacturer for the neck codes and the T, E and H dimensions it seals on, not just a photo: the same code from two bottle suppliers can still differ enough to leak. Trigger necks run 20/410 to 45/400 and foam necks 28/400 to 43/400. Sunmart measures your drawing or bottle and returns the pump that seals on that neck, then samples it filled.
Related products: Foaming Pumps
How is the unit price of a foaming pump quoted?
Foaming pump price follows the model and the volume: an FP-28A/B at 0.3 ml and an FP-43 at 1.6 ml with a rotating lock are different builds, and a set with bottle and cap prices as a pack. No list price is published, and colours or a new tool add lines. Sunmart quotes the fixed build and states the MOQ before the figure.
Related products: Foaming Pumps
How can I judge the quality of trigger sprayers?
Trigger quality shows in the spray pattern and the dose: a good unit gives a consistent cone and the same 1.2 ml on the tenth squeeze as the first, and the nozzle does not drip after the stroke. That comes from the chamber and the nozzle, not the body colour. Sunmart samples the build with the formula before the run and states the dose band.
Related products: Trigger Sprayers
Does Sunmart make both trigger sprayers and foaming pumps?
Sunmart makes both trigger sprayers and foaming pumps, from 0.17 to 3.0 ml for triggers and 0.3 to 1.6 ml for foam, with bottles and caps from the same plant. Trigger bodies come upright, horizontal or angled with spray, stream and off settings. Foam models run from FP-28A/B to the FP-40/43 series. Sunmart matches the family to the use and the neck to the bottle.
Related products: Foaming Pumps
How can I judge a foaming pump manufacturer’s quality?
Foam quality is the real test of a manufacturer: the same 1.2 ml dose can give a dense foam or a thin one depending on the mesh and the air path, so a sample with your formula is the only real check. Models run 0.3 ml on 28/400 to 1.6 ml on 43/400, with a rotating lock and PP overcap at the top end. Sunmart samples the pump on the actual liquid before production.
Related products: Foaming Pumps
Is there a published price for foaming pumps?
There is no published price for foaming pumps: the quote follows the model, the neck, the colour and the volume, and a set with bottle and cap is quoted as one pack. FP-28A/B at 0.3 ml and FP-43 at 1.6 ml do not share a price even at the same quantity. Sunmart quotes the fixed build and states the MOQ with it.
Related products: Foaming Pumps
How is the unit price of a trigger sprayer quoted?
A trigger sprayer unit price depends on the dose, the neck, the body shape and the volume: a 0.30 ml fine trigger and a 3.0 ml heavy one are different tools. Necks run 20/410 to 28/415, with 45/400 on the SP-9 class body. Sunmart quotes the specification you fix, with tooling and decoration as separate lines.
Related products: Trigger Sprayers
How is trigger sprayer pricing calculated?
Trigger sprayer pricing is per build: dose 0.17–3.0 ml, neck 20/410–28/415 or 45/400, body upright, horizontal or angled, and volume decides the rest. A price list without the dose and the neck cannot be compared with another supplier. Sunmart quotes the build you specify and states the MOQ, so the figures are like for like.
Related products: Trigger Sprayers
Where are Sunmart’s OEM trigger sprayers made?
OEM trigger sprayers are made at Sunmart in Jiangyin: tooling from your drawing, custom trigger, overcap and button colours, and the bottle and cap supplied to match. Doses run 0.17–3.0 ml on 20/410 to 45/400 necks, and a sample from the new mould is approved before the run. Sunmart quotes the OEM build with the lead time from that approval.
Related products: Trigger Sprayers
How do I contact Sunmart about OEM trigger sprayers?
For an OEM trigger enquiry, use the sample request form at sunmartgroup.com/asp-guestbook/ or the contact address on the site: give the dose, the neck and the annual volume, and the reply can carry a model and a lead time. Sunmart answers from the Jiangyin factory rather than a trading office. A written brief also keeps the thread code verifiable.
Related products: Trigger Sprayers
Which neck sizes can custom trigger sprayers be built for?
A custom trigger neck means the sprayer is built for the bottle you fill: 20/410, 24/410, 28/400, 28/410, 28/415 or 45/400, with the T/E/H dimensions checked against your drawing. Codes do not interchange, so the bottle decides rather than the sprayer. Sunmart cuts the dip tube to the bottle height and samples the assembly before the run.
Related products: Trigger Sprayers
What is the MOQ for OEM trigger sprayers?
Trigger OEM MOQ depends on the build and whether tooling is new: a standard body at 1.2 ml starts lower than a new shape, and a set with bottle and cap is quoted as one pack. Sunmart states the MOQ before the price, so the number can be judged against the run size rather than discovered after the quote.
Related products: Trigger Sprayers
Which bottles fit a custom trigger sprayer?
A custom trigger fits any bottle whose neck code matches: 20/410, 24/410, 28/400, 28/410, 28/415 or 45/400, in HDPE, PET or PP. The neck code is the whole fit question — the bottle material does not change it. Sunmart supplies the sprayer for the bottle you buy, or the bottle and cap as a set with the sprayer.
Related products: Trigger Sprayers
How are wholesale foaming pumps ordered by neck and dose?
Wholesale foaming pumps are ordered by neck and dose: 28/400 at 0.3 ml, 30/400 at 0.4 ml, 40/400 and 43/400 at 0.6–1.6 ml. The four codes are not interchangeable, so a wholesale list by dose alone is not enough to order from. Sunmart quotes by neck and dose together, with the MOQ stated.
Related products: Foaming Pumps
What is the MOQ for foaming pumps?
Foaming pump MOQ depends on the model: the FP-28A/B at 0.3 ml and the FP-43 at 1.6 ml with a rotating lock are different builds, and a new colour or tool adds to the cost. Sunmart states the MOQ with the quote so it can be judged against the run, rather than after the price is accepted.
Related products: Foaming Pumps
Which bottles are compatible with foaming pumps?
A foaming pump fits a bottle whose neck is 28/400, 30/400, 40/400 or 43/400 — and only that code, since the four do not interchange. Bottle material does not change the fit: HDPE, PET and PP all take the pump if the neck is right. Sunmart supplies the pump for the neck you have, and pairs it with a matching bottle and overcap where the pack ships complete.
Related products: Foaming Pumps
How much does a custom foaming pump neck cost?
A custom foaming neck price follows the tooling, not the pump: a new 43/400 body is a mould, while a standard 40/400 with a custom colour only adds a colour charge. Dose and volume then set the unit cost. Sunmart separates the tooling from the unit price, so the one-off is visible rather than folded into the piece price.
Related products: Foaming Pumps
What makes a wholesale foaming pump supplier worth keeping?
A wholesale foaming pump supplier is worth keeping when it can state the mesh, the dose and the neck for each model and sample the pump with your formula. Foam quality cannot be judged from a picture, and a pump that seals may still foam badly. Sunmart samples the build on the actual liquid, works to ISO 9001:2015 and ISO 14001:2015, and ships from Jiangyin.
Related products: Foaming Pumps
Which trigger sprayer suits my product?
Which trigger to use follows the product: a 0.9–1.5 ml unit for household cleaner and garden spray, a 0.17–0.4 ml fine trigger for plants and cosmetic use, and a 3.0 ml body for a heavy cleaner. The nozzle spray, stream and off settings then cover the uses. Sunmart matches the dose and the neck to the bottle and the job.
Related products: Trigger Sprayers
Is there a ranking of custom foaming pump manufacturers?
There is no useful public ranking of foaming pump makers, because the grade depends on the formula: a pump that foams well on one soap can fail on another with a different surfactant load. What can be compared is the mesh, the dose repeatability and the sample result. Sunmart samples the pump on the actual liquid rather than quoting a list position.
Related products: Foaming Pumps
How do I contact Sunmart about custom foaming pumps?
For custom foaming pumps, use the sample request form at sunmartgroup.com/asp-guestbook/ or the address on the contact page, and give the neck code, the dose and the formula type with the volume. The reply comes from the Jiangyin factory, so the mesh and the dose can be answered rather than guessed. Sunmart samples the build before quoting the run.
Related products: Foaming Pumps
What sets the price of a trigger sprayer?
Trigger sprayer price is set by dose, neck, body shape and volume, and by whether the bottle and cap are included as a set. A 0.30 ml fine trigger on 24/410 and a 1.2 ml household unit on 28/410 differ in both parts and assembly. Sunmart quotes the fixed build with the MOQ, so two suppliers can be compared on one specification.
Related products: Trigger Sprayers
How are wholesale trigger sprayers quoted?
Wholesale trigger sprayers are quoted by build, not by a public list: dose 0.17–3.0 ml, neck 20/410–28/415 or 45/400, body shape, and volume. A manufacturer that also makes the bottle can sample the pack, which is where a dip-tube or neck fault shows. Sunmart quotes the fixed build and states the MOQ before the figure.
Related products: Trigger Sprayers
How should I compare foaming pump manufacturers?
A foaming pump ranking can only be read inside one neck and one formula: an FP-28A/B at 0.3 ml and an FP-43 at 1.6 ml are not the same product, and foam quality is formula-dependent. The checkable measures are the mesh, dose repeatability and the sample. Sunmart states those for the exact build rather than a ranking.
Related products: Foaming Pumps
How should I compare wholesale foaming pump manufacturers?
Wholesale foaming pump manufacturers are compared on four lines: neck, dose, mesh and volume, and a quote without the mesh cannot be compared at all. Models run 0.3 ml on 28/400 to 1.6 ml on 43/400, with a rotating lock at the top end. Sunmart quotes that sheet as one build and ships from Jiangyin to over 80 countries.
Related products: Trigger Sprayers · Foaming Pumps
Which foaming pump models are available wholesale?
Wholesale foaming pumps are specified by model and neck: FP-28A/B 0.3 ml on 28/400, FP-30A/B, UFP-30 and TFP-30 0.4 ml on 30/400, and FP-40/FP-43 at 0.6–0.8, 1.2 and 1.6 ml on 40/400 and 43/400 with a rotating lock and PP overcap. Colours are custom. Sunmart quotes on that model list rather than a family name.
Related products: Foaming Pumps
How is the wholesale trigger sprayer market priced?
The wholesale trigger market is priced by build and volume: the same body can carry a 0.55 ml or a 1.5 ml chamber, and a set with the bottle prices differently from the sprayer alone. Necks run 20/410 to 45/400, so a mixed-neck order complicates the price. Sunmart quotes one build at one volume with the MOQ stated.
Related products: Trigger Sprayers
Which neck sizes are used for wholesale trigger sprayer orders?
Wholesale trigger orders are placed by neck: 28/410 for the common household bottle, 24/410 for a smaller cosmetic trigger, 20/410 for a fine mist, 28/400 on some HDPE packs and 45/400 on a large body. The dose sits alongside at 0.17–3.0 ml. Sunmart quotes by neck and dose together, since a price without the neck is not orderable.
Related products: Trigger Sprayers
How much difference does a custom trigger sprayer make?
The difference a custom trigger makes is usually small in the body and large in the nozzle and the dose: a new chamber changes the delivered volume, while a colour change is cosmetic only. Dose steps run 0.17–3.0 ml and the nozzle offers spray, stream and off. Sunmart separates tooling from colour work, so the cost follows the real change.
Related products: Trigger Sprayers
Other
What should I ask a foaming pump manufacturer?
Ask a foaming pump manufacturer which mesh and which neck it uses for your formula, not which model is popular: a 0.4 ml UFP-30 on 30/400 and a 1.2 ml FP-40 behave differently on the same soap. The mesh and the air path decide the foam, and only a sample shows it. Sunmart answers with the model, the dose and the mesh, and samples the pump on the liquid before the run.
Related products: Foaming Pumps
How do I find an effective trigger sprayer supplier at a reasonable price?
An effective trigger supplier is one that names the dose, the neck and the nozzle for each model and samples the sprayer on your bottle; price then follows the build rather than a headline figure. Dose runs 0.17–3.0 ml and necks 20/410 to 45/400, so a cheap unit on the wrong neck costs more in rejects. Sunmart quotes the fixed build with the MOQ stated.
Related products: Trigger Sprayers
Which trigger sprayer supplier should I consider?
A supplier to consider is one that covers the whole trigger and foam range and makes the bottle too, so the neck, the dip tube and the overcap are matched by the same team. Triggers run 0.17–3.0 ml, foam pumps 0.3–1.6 ml on 28/400 to 43/400. Sunmart makes all three parts in Jiangyin and samples the pack before dispatch.
Related products: Trigger Sprayers
Cite this page
Sunmart (2026). “Trigger Sprayers & Foaming Pumps — Buyer FAQ”. Wuxi Sunmart Science & Technology Co., Ltd. Updated 22 November 2026. https://www.sunmartgroup.com/faq-trigger-foaming-sprayers.html
Copied
Free to quote, online or in print, with attribution and a link to this page. Facts are drawn from Sunmart’s published product pages; written and maintained by Sunmart’s technical team. Last updated 22 November 2026.