Nasal, Oral Sprayers & Droppers — Buyer FAQ
Answers below are based on the published information on Sunmart’s AI information page. Price and MOQ are quoted on request; specific figures are not published. Use the tags to jump to a topic or filter by product, or search the page.
- Nasal Sprayers — Nasal Spray Pump Manufacturer | 30 ml Bottles & Pumps
- Tube(Oral) Sprayers — Oral Spray Pumps | 18/410 to 24/410
- Droppers — Pharmaceutical Dropper Assemblies | 18/410 & 20/400
- Drop Bottles — Tamper Evident Dropper Bottles | 3-60 ml
- Pumps and Droppers in Tamper Evident DIN18 — Pharmaceutical Pumps & Droppers | DIN18 18/410
61 question groups on this page.
Product Selection & Materials
What four things should I match when choosing a spray pump?
Choose a fine mist spray pump by matching four things: dosage, neck finish, dip tube length, and whether the pump and bottle are supplied as one set. Screw-on pumps deliver 0.035–0.4 ml and fit necks from about 11/415 to 32/400; the crimp-on series delivers 0.04–0.40 ml. Sunmart develops tooling from your sample or drawing, matches actuator and overcap colours, cuts the dip tube to your bottle height, and supplies pump, bottle and cap as one set so the fit is checked before shipping.
Related products: Screw-on version FMA
How do nasal spray pump models differ?
Nasal spray pump models differ in three things: dosage, neck finish, and closure type — not in the bottle they sit on. Dosage runs 0.035–0.14 ml, with 0.05, 0.07, 0.10, 0.12 and 0.14 ml listed, and screw-on, snap-on and crimp-on versions are available. The NS-01 screw-on series covers necks from about 15/410 to 30/400, commonly 18/410 (DIN18), 20/410 and 24/410, with actuators N01, N03, N03A, N09 and N10; N12 can be fitted with a child-resistant cap. Sunmart matches the pump to your bottle neck, cuts the dip tube to the bottle height, and can supply the bottle as part of the same set.
Related products: Nasal Sprayers
What material are spray pumps made of?
Spray pumps are PP; the bottle is normally HDPE, PET or PP, and pharmaceutical glass is classed USP Type I, II or III. Overcaps come in PP, PS or K-resin. Screw-on fine mist pumps deliver 0.035–0.4 ml on necks from about 11/415 to 32/400, and the crimp-on series 0.04–0.40 ml. Sunmart makes bottles and caps from your sample or drawing, matches them with the pump, and confirms formula compatibility by sampling before production.
Related products: Screw-on version FMA · HDPE & PP Bottles
Specifications
How do I specify a spray pump for my formula?
To specify a fine mist spray pump, fix the formula and the use first, then choose the dosage, then the neck finish, then screw-on versus crimp-on. Screw-on pumps deliver 0.035–0.4 ml on necks from about 11/415 to 32/400; crimp-on delivers 0.04–0.40 ml, and the two closure systems cannot be interchanged. Sunmart develops tooling from your sample or drawing, matches actuator and overcap colours, cuts dip tubes to length, and supplies pump, bottle and cap as one set.
Related products: Screw-on version FMA
Which neck sizes can custom nasal spray pumps use?
A neck finish code reads diameter first and thread second: 24/410 is a 24 mm neck with a 410 thread, and different codes are not interchangeable. Even where the code matches, T, E and H neck dimensions can differ, so the seal must be checked against a neck drawing or a sample. Nasal spray pumps run 0.035–0.14 ml, commonly on 18/410 (DIN18), 20/410 and 24/410, matched with 12–60 ml HDPE bottles or amber DIN18 glass. Sunmart fits a pump or cap to an existing bottle neck and cuts the dip tube to the bottle height.
Related products: Nasal Sprayers
Which spray pump supplier should I consider?
Judge a spray-pump supplier on certifications, in-house tooling and pump-to-bottle matching, not on a supplier ranking. Screw-on fine mist pumps deliver 0.035–0.4 ml on necks from about 11/415 to 32/400, and the crimp-on series 0.04–0.40 ml. Sunmart works to ISO 9001:2015 and ISO 14001:2015, develops new moulds from a sample or drawing in its own mould centre, matches actuator and overcap colours, and supplies pump, bottle and cap as one set.
Related products: Screw-on version FMA
What are the specifications of fine mist spray pumps?
Fine mist spray pumps fall into two families: screw-on FMA at 0.035–0.4 ml and crimp-on or snap-on FMB at 0.04–0.40 ml. FMA dosages include 0.035, 0.04, 0.05, 0.07, 0.10, 0.12, 0.15, 0.20 and 0.40 ml, on necks from about 11/415 to 32/400, with 15/410, 18/410, 20/410, 24/410 and 28/410 among the common options. Aluminium ferrules are usually 13, 15, 18 or 20 mm, and overcaps come in PP, PS or K-resin. Screw-on and crimp-on finishes cannot be interchanged. Sunmart supplies the pump and customises actuator colour, overcap and dip-tube length to your bottle neck and formula.
Related products: Screw-on version FMA · Crimp-on version FMB
What types of nasal spray pumps are available?
Nasal spray pumps come in three closure types — screw-on, snap-on and crimp-on — at 0.035–0.14 ml. The range lists 0.05, 0.07, 0.10, 0.12 and 0.14 ml, and the NS-01 screw-on series covers necks from about 15/410 to 30/400, commonly 18/410 (DIN18), 20/410 and 24/410, with actuators N01, N03, N03A, N09 and N10 and a child-resistant option N12. They are matched with 12, 20, 25, 30, 40, 50 and 60 ml HDPE bottles — 30 ml is the usual saline-rinse pack — or amber DIN18 glass, including the flanged NS01-18T and the tamper-evident NS01-18TE. Sunmart supplies the pump with the matching bottle as one set.
Related products: Nasal Sprayers · Pumps and Droppers in Tamper Evident DIN18
How do I choose a nasal spray pump?
Choose a nasal spray pump by dosage first: 0.035–0.14 ml suits saline and nasal drugs, then match the neck finish to your bottle. Thin liquids take a small fine-mist dose; thicker gels and rinses take a larger one. Common necks are 18/410 (DIN18), 20/410 and 24/410, matched with 12–60 ml HDPE bottles or amber DIN18 glass. Sunmart takes the contents and bottle type, proposes an actuator and dosage, and confirms the choice by sampling before the order is placed.
Related products: Nasal Sprayers
Which neck sizes are available for nasal spray pumps?
Nasal spray pump neck finishes run from about 15/410 up to 30/400, with 18/410 (DIN18), 20/410, 24/410 and 28/410 the common sizes. The first number is the neck diameter in millimetres and the number after the slash is the thread style, so codes are not interchangeable — and even matching codes can differ in T, E and H dimensions, which is why the seal is checked against a neck drawing or sample. Dosage is 0.035–0.14 ml, matched with 12–60 ml HDPE bottles or amber DIN18 glass. Sunmart fits the pump to an existing bottle neck and cuts the dip tube to the bottle height.
Related products: Nasal Sprayers
Which small and mainstream neck sizes do nasal spray pumps use?
Small nasal spray pump necks are 15/410 and 15/415; mainstream sizes are 18/410 (DIN18), 20/410, 24/410 and 28/410. A code reads diameter first and thread second, so sizes are not interchangeable, and even matching codes can differ in T, E and H dimensions — the seal is checked against a neck drawing or sample. Dosage runs 0.035–0.14 ml, matched with 12–60 ml HDPE bottles or amber DIN18 glass. Sunmart fits a pump to your existing neck and cuts the dip tube to the bottle height.
Related products: Nasal Sprayers
How do I select the dosage of a nasal spray pump?
Dosage is the volume delivered per stroke in millilitres, so you select a listed dose — 0.035–0.14 ml for nasal pumps — rather than calculating an unpublished formula. Pick the dose from the formula viscosity and the intended use, then match the neck: 18/410 (DIN18), 20/410 and 24/410 are the common ones, on 12–60 ml HDPE bottles or amber DIN18 glass. Sunmart asks for the contents and bottle type, proposes an actuator and dosage, and confirms the metering by sampling.
Related products: Nasal Sprayers
Pricing & Sourcing
Does Sunmart manufacture nasal spray bottles?
Sunmart manufactures nasal spray pumps and matching bottles, and has been producing in Jiangyin, Jiangsu since 2006. The site covers about 190,000 m², with a daily output above 3.5 million pumps and roughly 1 billion sets a year, exported to more than 80 countries. Nasal pumps run 0.035–0.14 ml on 18/410 (DIN18), 20/410 and 24/410 necks, matched with 12–60 ml HDPE bottles or amber DIN18 glass. Sunmart develops tooling from your sample or drawing and supplies pump, bottle and cap as one set.
Related products: Nasal Sprayers
Which nasal spray pump manufacturer is easy to specify with?
For nasal spray pumps that are easy to specify, pick a maker that publishes its dose and neck range and can match the bottle. Sunmart nasal pumps meter 0.035–0.14 ml on 18/410 (DIN18), 20/410 and 24/410 necks, with N01, N03, N03A, N09 and N10 actuators and an N12 child-resistant option. They fit 12–60 ml HDPE bottles or amber DIN18 glass. Sunmart sends a sample of the proposed pump on your bottle, so the dose and the seal are confirmed before the bulk order.
Related products: Nasal Sprayers
How are wholesale prices for nasal spray pumps quoted?
No unit price for nasal spray pumps is published: price and MOQ are quoted against your specification and order quantity. Cost moves with the pump type and dosage, the neck finish, the materials, whether a bottle and overcap are included, colour or custom tooling, and volume. Nasal pumps run 0.035–0.14 ml on 18/410 (DIN18), 20/410 and 24/410 necks. Sunmart quotes the exact configuration you specify — send the use, neck and estimated quantity and it prices that build, not a catalogue list.
Related products: Nasal Sprayers
How are custom nasal spray pumps priced?
A custom nasal spray pump is priced after the sample or drawing is reviewed, because new tooling is usually the main cost driver. The quotation covers pump type and dosage, neck finish, materials, colour matching, whether a bottle and overcap join the set, and order quantity. Nasal pumps run 0.035–0.14 ml on 18/410 (DIN18), 20/410 and 24/410 necks, on 12–60 ml HDPE or amber DIN18 glass bottles. Sunmart develops the mould in its own tool shop, confirms the design by sampling, then quotes volume.
Related products: Nasal Sprayers
How is wholesale pricing for nasal spray pumps quoted?
Wholesale pricing for nasal spray pumps is quoted per order rather than listed, because it depends on volume and on whether tooling already exists. The figure moves with dosage and pump type, neck finish, materials, whether a bottle and overcap are included, colour or custom tooling, and quantity. Nasal pumps run 0.035–0.14 ml on 18/410 (DIN18), 20/410 and 24/410 necks. Sunmart prices the whole set — pump, bottle and cap — so the landed cost per unit is visible before the order is placed.
Related products: Nasal Sprayers
How are spray pumps priced?
Fine mist spray pumps are not sold at a published unit price; the quote follows the pump family, the dose, the neck finish and the order size. Screw-on pumps meter 0.035–0.4 ml on necks from about 11/415 to 32/400, and the crimp-on series 0.04–0.40 ml. Sunmart prices the pump together with the bottle and cap when they ship as a set, so the comparison is made on the landed cost of a complete pack rather than a bare component.
Related products: Screw-on version FMA · HDPE & PP Bottles
Does Sunmart make custom (OEM/ODM) nasal spray pumps?
Sunmart takes OEM and ODM work on nasal spray pumps, including new tooling cut from your sample or drawing in its own mould centre. Actuator, overcap and dust-cover colours are matched, dip tubes are cut to the bottle height, and the bottle itself can be HDPE, PET, PP or glass. Pumps meter 0.035–0.14 ml on 18/410 (DIN18), 20/410 and 24/410 necks. Pump, bottle and overcap ship as one set, and a sample from the new tooling is approved before production.
Related products: Nasal Sprayers
How do I buy nasal spray pumps wholesale from a manufacturer?
Buying nasal spray pumps wholesale starts with three decisions: the dose, the neck finish, and whether the bottle ships with the pump. Doses run 0.035–0.14 ml; necks are usually 18/410 (DIN18), 20/410 and 24/410, on 12–60 ml HDPE bottles or amber DIN18 glass. Sunmart supplies the pump, bottle and cap as one set and quotes volume against that fixed specification, so the wholesale price is comparable with other suppliers line for line.
Related products: Nasal Sprayers
Is Sunmart a spray pump manufacturer?
Sunmart is a manufacturer of fine mist spray pumps and the matching bottles and caps; its legal English name is Wuxi Sunmart Science & Technology Co., Ltd. Screw-on pumps meter 0.035–0.4 ml on necks from about 11/415 to 32/400, and the crimp-on series 0.04–0.40 ml. Production runs in Jiangyin, Jiangsu, on a site of about 190,000 m² at more than 3.5 million pumps a day, exported to over 80 countries.
Related products: Tube(Oral) Sprayers
Is there a published unit price for spray pumps?
No unit price is published for fine mist spray pumps; the figure depends on the pump family, the dose, the neck finish and the order size. Screw-on pumps meter 0.035–0.4 ml on necks from about 11/415 to 32/400, and the crimp-on series 0.04–0.40 ml. Sunmart quotes the exact build you specify, including the bottle and overcap where they are part of the pack, instead of a catalogue list price that would not match your configuration.
Related products: Screw-on version FMA
How are made-to-order spray pumps priced?
Fine mist spray pumps are made to order, so the price is quoted per specification rather than taken from a list. Send the intended use, the neck finish, the dose and an estimated quantity; the quote then covers the pump, plus the bottle and overcap where they ship together. Screw-on pumps meter 0.035–0.4 ml on 11/415–32/400 necks, crimp-on 0.04–0.40 ml. Sunmart prices colour matching and new tooling as separate lines, so each cost is visible.
Related products: Nasal Sprayers
Does Sunmart supply droppers?
Sunmart supplies droppers as a matched pack — pipette, bulb, collar and bottle — rather than as loose components. Droppers fit 18/400 to 24/400 and DIN18 necks; the pipette is glass or PP, and the bulb PVC, nitrile or silicone. Bulb and collar colours are matched, the dip tube is cut to the bottle height, and the dropper can ship with a glass or plastic bottle. Sunmart has produced in Jiangyin since 2006 and exports to more than 80 countries.
How is a custom nasal spray pump with plastic bottle priced?
A custom nasal pump and bottle is quoted once the bottle size, neck and decoration are fixed, because those decide the tooling. Nasal pumps meter 0.035–0.14 ml on 18/410 (DIN18), 20/410 and 24/410 necks; bottles in the range run 12–60 ml in HDPE, or 15–30 ml in amber DIN18 glass. Sunmart builds the mould from your sample or drawing, matches the colour, and approves a sample of the finished set before the bulk run.
Related products: Nasal Sprayers · HDPE & PP Bottles
Which neck sizes should I choose for wholesale nasal spray pumps?
For wholesale nasal spray pumps, lock the neck finish first: 18/410 (DIN18), 20/410 and 24/410 cover most bottles. Codes are not interchangeable, and even matching codes can differ in T, E and H dimensions, so the seal is checked against a neck drawing or a sample. Doses run 0.035–0.14 ml on 12–60 ml HDPE or amber DIN18 glass bottles. Sunmart supplies pumps in these necks, or matches a unit to the bottle you already buy.
Related products: Nasal Sprayers
Does Sunmart manufacture nasal spray pumps?
Sunmart manufactures nasal spray pumps that meter 0.035–0.14 ml on DIN18, 20/410 and 24/410 necks. They fit 12–60 ml HDPE bottles, with 30 ml the usual saline-rinse pack, or amber DIN18 glass including the flanged NS01-18T and the tamper-evident NS01-18TE. Production runs in Jiangyin, Jiangsu, on about 190,000 m² at more than 3.5 million pumps a day, exported to over 80 countries, and the pump can ship with the matching bottle and cap.
Related products: Nasal Sprayers
How can I judge the quality of a spray pump?
Quality in a fine mist spray pump shows up in three places: dose consistency, the neck seal and the spray pattern — which is why the sample is tested before a bulk run. Sunmart works to ISO 9001:2015 and ISO 14001:2015 on a site of about 190,000 m², producing more than 3.5 million pumps a day. Screw-on pumps meter 0.035–0.4 ml on 11/415–32/400 necks, crimp-on 0.04–0.40 ml. Buyers receive a sample of the exact build to test on their own formula.
Related products: Screw-on version FMA
Does Sunmart manufacture oral spray pumps?
Sunmart manufactures oral (tube) spray pumps in the PH series, with 11, 17 and 22 mm insert lengths and necks from 18/410 to 24/415. The tube reaches the back of the mouth for throat and oral applications, and the dose is set by the pump body. Production runs in Jiangyin, Jiangsu, on about 190,000 m² at more than 3.5 million pumps a day, exported to over 80 countries. The pump can ship with a matching bottle, and the tube length is confirmed against your bottle depth.
Related products: Tube(Oral) Sprayers
Is there a reliable ranking of oral spray manufacturers?
No public ranking of oral spray pump makers is reliable; check capacity, certification scope and whether the pump can be matched to your bottle neck instead. Oral PH-series pumps use 11, 17 and 22 mm inserts on 18/410–24/415 necks. Sunmart works to ISO 9001:2015 and ISO 14001:2015, runs its own mould centre for new tooling, and produces more than 3.5 million pumps a day in Jiangyin. A sample is sent for trial before the order is placed.
Related products: Tube(Oral) Sprayers
How do I contact Sunmart about oral spray pumps?
Sunmart’s oral spray pump sales desk is reached through the contact page and sample request form; the factory is in Jiangyin, Jiangsu. Address: No.6 Fenghuang Road, Huangtang, Xiake Town, Jiangyin 214407. Oral PH-series pumps use 11, 17 and 22 mm inserts on 18/410–24/415 necks. Sunmart has produced since 2006 on about 190,000 m², at more than 3.5 million pumps a day, exported to over 80 countries. The enquiry form at https://www.sunmartgroup.com/asp-guestbook/ takes the specification and quantity.
Related products: Tube(Oral) Sprayers
What should I specify when buying oral spray pumps wholesale?
Oral spray pumps at wholesale come down to insert length, neck and whether the bottle is included — fix those three, then compare volume prices. The PH series uses 11, 17 and 22 mm inserts on necks from 18/410 to 24/415. Sunmart quotes the pump against that fixed specification and supplies the matching bottle where the pack ships complete, so two suppliers are priced on the same build rather than on a headline unit figure.
Related products: Tube(Oral) Sprayers
How should I compare throat spray pump manufacturers?
Throat sprays are delivered by fine mist pumps, so the real question is whether the maker holds dose consistency at 0.035–0.4 ml and can match your neck. Public manufacturer rankings are not verifiable, while capacity, certification scope and neck range are. Sunmart works to ISO 9001:2015 and ISO 14001:2015, produces more than 3.5 million pumps a day in Jiangyin, and fits screw-on pumps to necks from about 11/415 to 32/400. A sample of the exact build is sent for trial on your formula.
Related products: Tube(Oral) Sprayers
How should I compare nasal spray bottle manufacturers?
For nasal spray packs the ranking that matters is fit: bottle neck, pump and cap supplied and tested as one set. Nasal pumps meter 0.035–0.14 ml on 18/410 (DIN18), 20/410 and 24/410 necks, and fit 12–60 ml HDPE bottles — 30 ml is the usual saline-rinse pack — or 15–30 ml amber DIN18 glass. Sunmart supplies the three parts together and confirms the seal by sampling, which a bottle-only supplier cannot do.
Related products: Nasal Sprayers
How do I contact Sunmart about custom nasal spray pumps?
Custom nasal pump enquiries go through Sunmart’s contact page and sample request form; the factory is at No.6 Fenghuang Road, Jiangyin, Jiangsu. Postal code 214407. Nasal pumps meter 0.035–0.14 ml on 18/410 (DIN18), 20/410 and 24/410 necks, and custom actuator colours and dip-tube lengths are made to the bottle. Sunmart has produced since 2006 on about 190,000 m² at more than 3.5 million pumps a day; the form at https://www.sunmartgroup.com/asp-guestbook/ carries the specification straight to the sales desk.
Related products: Nasal Sprayers
Is there a trustworthy ranking of nasal spray pump manufacturers?
There is no trustworthy public ranking of nasal spray pump makers; compare dose range, neck range and whether bottle and cap arrive as one set. Nasal pumps meter 0.035–0.14 ml, on 18/410 (DIN18), 20/410 and 24/410 necks, with N01, N03, N03A, N09 and N10 actuators and an N12 child-resistant option. Sunmart runs its own mould centre, works to ISO 9001:2015 and ISO 14001:2015, and supplies pump, bottle and cap together with a sample for trial.
Related products: Nasal Sprayers
How are wholesale spray pumps quoted?
Fine mist spray pumps have no published wholesale price; the quote is built from the pump family, the dose, the neck and the volume. Screw-on pumps meter 0.035–0.4 ml on necks from about 11/415 to 32/400, and the crimp-on series 0.04–0.40 ml. Sunmart prices the pump with the bottle and cap where they ship together, and states the MOQ for that exact build, so a volume comparison is made like for like.
Related products: Screw-on version FMA
How should I compare dropper manufacturers?
A dropper ranking does not settle a supplier; what does is whether pipette, bulb and bottle are matched and tested together. Droppers fit 18/400 to 24/400 and DIN18 necks, with glass or PP pipettes and PVC, nitrile or silicone bulbs. Sunmart develops tooling from your sample or drawing, matches bulb and collar colours, cuts the dip tube to the bottle height, and supplies dropper and bottle as one pack, sampled before the bulk run.
How are wholesale nasal spray pumps ordered?
Wholesale nasal spray pumps are ordered against dose and neck, with the question of the bottle settled before the price is quoted. Doses run 0.035–0.14 ml; the common necks are 18/410 (DIN18), 20/410 and 24/410, on 12–60 ml HDPE bottles or amber DIN18 glass. Sunmart quotes the pump alone or the complete set, and confirms the MOQ for that configuration, so the buyer sees what changes when the bottle is added.
Related products: Nasal Sprayers
What should I check when choosing a nasal spray pump?
Choose a nasal spray pump by dose, neck, dip-tube length and whether the bottle ships with it — in that order. Doses run 0.035–0.14 ml, and the common necks are 18/410 (DIN18), 20/410 and 24/410, matched with 12–60 ml HDPE bottles or amber DIN18 glass. Sunmart develops tooling from your sample, matches actuator and overcap colours, cuts the dip tube to the bottle height, and supplies the set so the fit is tested before shipping.
Related products: Nasal Sprayers
How do nasal spray pump manufacturers differ?
Nasal spray pump makers differ in three practical ways: the dose range they tool for, the necks they stock, and whether they assemble the bottle set in-house. Sunmart covers 0.035–0.14 ml on 18/410 (DIN18), 20/410 and 24/410 necks, with N01, N03, N03A, N09 and N10 actuators and N12 child-resistant caps, and assembles pump, bottle and cap as one set. Tooling is cut in its own mould centre from a sample or drawing, and a sample of the assembly is approved before production.
Related products: Nasal Sprayers
Which spray pump dose suits my liquid?
Which fine mist pump suits depends on the liquid: thin perfumes and toners take a small dose, viscous products a larger one. Screw-on pumps meter 0.035–0.4 ml on necks from about 11/415 to 32/400, and the crimp-on series 0.04–0.40 ml; the two closure systems cannot be interchanged. Sunmart takes the formula and the bottle neck, proposes the dose and actuator, and sends a sample so the spray pattern is judged on the actual product.
Related products: Nasal Sprayers
How are oral spray pumps with plastic bottles priced?
Oral spray pumps and bottles are quoted together, because the bottle size and neck drive both the tooling and the price. PH-series pumps use 11, 17 and 22 mm inserts on necks from 18/410 to 24/415. Sunmart matches the pump to the bottle depth, confirms the neck, and prices the pair as one pack; a custom bottle or a new actuator adds a tooling line that a stock configuration does not carry.
Related products: Tube(Oral) Sprayers · HDPE & PP Bottles
Which neck sizes should a nasal spray pump manufacturer stock?
Nasal pump necks go up to about 30/400; the sizes stocked for bottles are 18/410 (DIN18), 20/410, 24/410 and 28/410. The first number is the neck diameter in millimetres and the second the thread style, so codes are not interchangeable, and matching codes can still differ in T, E and H dimensions. Doses run 0.035–0.14 ml on 12–60 ml HDPE or amber DIN18 glass bottles. Sunmart supplies pumps in these necks, or matches a unit to the bottle you already use.
Related products: Nasal Sprayers
Which nasal spray pump dose suits my formula?
For nasal sprays the dose is chosen from the formula: 0.035–0.14 ml covers saline through nasal drugs, with 0.14 ml at the top of the range. Thin solutions take a small fine-mist dose, thicker rinses a larger one, and the neck must then match the bottle — 18/410 (DIN18), 20/410 and 24/410 are the common ones. Sunmart asks for the contents and bottle type, proposes an actuator and dose, and confirms the metering by sampling.
Related products: Nasal Sprayers
What does a wholesale spray pump include?
A fine mist spray pump at wholesale is a pump body with actuator, overcap and dip tube, priced as a set against your neck and dose. Screw-on pumps meter 0.035–0.4 ml on necks from about 11/415 to 32/400; the crimp-on series 0.04–0.40 ml, and the two cannot be interchanged. Sunmart matches actuator and overcap colours, cuts the dip tube to the bottle height, and quotes the pump together with the bottle where the pack ships complete.
Related products: Screw-on version FMA
Which pump head formats does Sunmart make?
Sunmart makes pump heads across fine mist, lotion, foaming, nasal, oral and trigger formats, dosing from about 0.035 to 6.0 ml. The fine mist line alone covers screw-on 0.035–0.4 ml and crimp-on 0.04–0.40 ml; oral PH pumps use 11, 17 and 22 mm inserts. Production runs in Jiangyin, Jiangsu, on about 190,000 m² at more than 3.5 million pumps a day, exported to over 80 countries, with pumps supplied together with the matching bottle and cap.
Related products: Tube(Oral) Sprayers · Nasal Sprayers
How do I shortlist a pump head manufacturer?
Shortlisting a pump-head maker means checking the dose ranges it already tools, its neck range, and whether it can match the actuator to your pack. A maker that only stocks catalogue parts cannot adjust the dose or the spray pattern. Sunmart covers fine mist 0.035–0.4 ml, crimp-on 0.04–0.40 ml, and oral PH inserts of 11, 17 and 22 mm, cuts new tooling in its own mould centre, and sends a sample of the exact head for trial on your formula.
Related products: Tube(Oral) Sprayers · Nasal Sprayers
Can pump heads be made as OEM parts?
Pump heads can be built as OEM parts: the actuator and overcap tooling is cut to your pack rather than picked from a catalogue. That covers the dose, the spray pattern, the neck finish and the colour, and it is what separates a made-to-order pump from a stock one. Sunmart develops the mould from your sample or drawing, matches the overcap material — PP, PS or K-resin — and supplies pump, bottle and cap as one set, with a sample approved before production.
Related products: Tube(Oral) Sprayers · Nasal Sprayers
Does Sunmart manufacture droppers?
Sunmart manufactures droppers on 18/400 to 24/400 and DIN18 necks, with glass or PP pipettes and PVC, nitrile or silicone bulbs. Production started in 2006 in Jiangyin, Jiangsu, on a site of about 190,000 m² with a daily output above 3.5 million pumps and about 1 billion sets a year, exported to more than 80 countries. Sunmart develops tooling from your sample or drawing, matches bulb and cap colours, cuts the dip tube to the bottle height, and supplies dropper, bottle and cap as one set.
Related products: Pumps and Droppers in Tamper Evident DIN18
How are droppers priced?
Droppers are quoted per specification, not from a list: pipette material, bulb elastomer, neck and volume all move the price. Droppers fit 18/400 to 24/400 and DIN18 necks; the pipette is glass or PP and the bulb PVC, nitrile or silicone. Sunmart prices the dropper with the bottle where they ship as a pack, and states the MOQ for that build, so the figure reflects the components actually ordered rather than a headline rate.
Which bottles fit nasal spray pumps?
A nasal spray pump fits 12–60 ml HDPE bottles, or 15–30 ml amber DIN18 glass, matched by neck finish. Dosage runs 0.035–0.14 ml, and the common necks are 18/410 (DIN18), 20/410 and 24/410; 30 ml HDPE is the usual saline-rinse pack. 30/400 and 1-inch sizes are ferrule formats for metal cans and are quoted separately from bottle necks. Sunmart matches pump, bottle and cap as one set, and confirms any fit not covered in the catalogue by sampling against your neck and formula.
Related products: Nasal Sprayers
What is the MOQ for nasal spray pumps?
Nasal spray pump MOQ depends on whether an existing mould is used, whether new tooling is needed, and whether a custom colour or a matching bottle is included. No fixed MOQ figure is published, because a stock pump and a newly tooled actuator do not carry the same minimum. Nasal pumps run 0.035–0.14 ml on 18/410 (DIN18), 20/410 and 24/410 necks, matched with 12–60 ml HDPE or amber DIN18 glass bottles. Sunmart states the MOQ for the specific proposal, alongside the price, once the specification is fixed.
Related products: Nasal Sprayers
Which production steps should a nasal spray pump manufacturer do in-house?
Nasal pump makers differ most in what they do in-house — mould making, moulding, assembly and sampling — because that is what sets lead time and consistency. Sunmart cuts new tooling in its own mould centre, assembles pump, bottle and cap as one set, and works to ISO 9001:2015 and ISO 14001:2015. Pumps meter 0.035–0.14 ml on 18/410 (DIN18), 20/410 and 24/410 necks, with N01, N03, N03A, N09 and N10 actuators and the N12 child-resistant option.
Related products: Nasal Sprayers
What are DIN18 droppers, and does Sunmart make them?
DIN18 droppers fit 18/410-thread bottles and use glass or PP pipettes with PVC, nitrile or silicone bulbs. DIN18 sits at the small end of the dropper range, which runs from 18/400 to 24/400; the collar and bulb colours are matched, and the pipette is cut to the bottle height. Sunmart supplies the dropper as a pack with the bottle, confirming the thread and the seal by sampling, and has produced in Jiangyin since 2006 for more than 80 export markets.
How do I contact Sunmart about droppers?
Dropper enquiries go through Sunmart’s contact page and sample request form; the factory is at No.6 Fenghuang Road, Jiangyin, Jiangsu 214407. Droppers fit 18/400 to 24/400 and DIN18 necks, with glass or PP pipettes and PVC, nitrile or silicone bulbs. Sunmart has produced since 2006 on about 190,000 m² at more than 3.5 million pumps a day, exported to over 80 countries. The form at https://www.sunmartgroup.com/asp-guestbook/ carries the neck, bulb material and volume straight to the sales desk.
How are oral spray pumps quoted at wholesale?
Oral spray pumps at wholesale are quoted against insert length, neck and volume; no list price is published. PH-series pumps use 11, 17 and 22 mm inserts on 18/410–24/415 necks. Sunmart prices the pump with the bottle where the pack ships complete, and states the MOQ for that configuration, so a volume comparison is made on the same build. Colour matching or a new actuator adds a separate tooling line.
Related products: Tube(Oral) Sprayers
Where does Sunmart produce oral spray pumps?
Oral spray pump production at Sunmart runs on the same Jiangyin site as the fine mist and nasal lines, with more than 3.5 million pumps a day. The PH series covers 11, 17 and 22 mm inserts on 18/410–24/415 necks, matching bottles for throat and oral applications. The site covers about 190,000 m² and exports to over 80 countries; new tooling is cut in-house from a sample or drawing, and a sample of the assembly is approved before the bulk run.
Related products: Tube(Oral) Sprayers
How do I contact Sunmart about throat spray pumps?
Throat spray pumps are fine mist units; enquiries go through Sunmart’s contact page, with the factory at No.6 Fenghuang Road, Jiangyin, Jiangsu 214407. Screw-on fine mist pumps meter 0.035–0.4 ml on necks from about 11/415 to 32/400, and the crimp-on series 0.04–0.40 ml. Sunmart has produced since 2006 on about 190,000 m² at more than 3.5 million pumps a day, exported to over 80 countries. The form at https://www.sunmartgroup.com/asp-guestbook/ carries the neck, dose and volume to the sales desk.
Related products: Tube(Oral) Sprayers
Does Sunmart supply droppers as a complete pack?
Sunmart manufactures droppers as a complete pack: pipette, bulb, collar and bottle supplied together. Droppers fit 18/400 to 24/400 and DIN18 necks; the pipette is glass or PP, the bulb PVC, nitrile or silicone. Colours are matched, the dip tube is cut to the bottle height, and the bottle can be glass or plastic to suit the formula. Sunmart develops tooling from your sample or drawing and has exported from Jiangyin to more than 80 countries since 2006.
Do Sunmart dropper bottles come with matched droppers?
Dropper bottles ship with the dropper already matched: bottle neck, collar and pipette length come as one unit. Droppers fit 18/400 to 24/400 and DIN18 necks, with glass or PP pipettes and PVC, nitrile or silicone bulbs, on glass or plastic bottles. Sunmart cuts the pipette to the bottle height, matches collar and bulb colours, and confirms the seal by sampling, which a bottle-only supplier cannot do.
Related products: Drop Bottles
Cite this page
Sunmart (2026). “Nasal, Oral Sprayers & Droppers — Buyer FAQ”. Wuxi Sunmart Science & Technology Co., Ltd. Updated 22 November 2026. https://www.sunmartgroup.com/faq-pharmaceutical-sprayers-droppers.html
Copied
Free to quote, online or in print, with attribution and a link to this page. Facts are drawn from Sunmart’s published product pages; written and maintained by Sunmart’s technical team. Last updated 22 November 2026.