Buyer FAQ

Lotion & Treatment Pumps — Buyer FAQ

Answers below are based on the published information on Sunmart’s AI information page. Price and MOQ are quoted on request; specific figures are not published. Use the tags to jump to a topic or filter by product, or search the page.

Products in this category
Request a quotation or samples. Call +86-510-82733182 or email [email protected] / [email protected]. You can also use the inquiry form. Fax: +86-510-82739973.

78 question groups on this page.

No questions match this search. Clear the box or choose another tag.

Product Selection & Materials

What material are lotion pumps made of?

Lotion pump bodies, actuators and closures are PP, and the dip tube is PE, so the wetted parts are plastic rather than metal. The range doses 1.0–6.0 ml on 20/410 to 28/415 necks, with 30/400, 33/400 and 38/410 at the largest doses, and a down-lock or rotating switch. External-spring versions such as L1-ANS and L1-NS keep the spring outside the product path. Sunmart moulds the pump in-house and states the grade, so the material can be checked against the formula.

Related products: Treatment Pumps · Lotion Pumps

How do I choose a lotion pump model: dose, neck or lock first?

Choose the lotion pump by dose first, then the neck, then the lock: the dose sets the model, and the neck and lock decide whether it fits your bottle and your filling line. Dose runs 1.0–6.0 ml; at 3–4 ml the pump moves to 30/400 or 33/400, and at 6.0 ml to 38/410. The neck must match the bottle code exactly. Sunmart confirms the build against a bottle drawing or sample before quoting.

Related products: Lotion Pumps

Should I choose a lotion pump model by dose or by bottle size?

The model follows the fill weight, not the bottle: a 30 ml bottle at 2.0 ml a press needs a 2.0 ml pump, and the same bottle at 1.0 ml needs a different one. Dose options are 1.0, 1.5, 2.0, 3.0, 4.0 and 6.0 ml, with down-lock or rotating switch and internal or external spring. Sunmart matches the model to the fill weight and the bottle neck, and checks the stroke on a sample.

Related products: Lotion Pumps

What materials are cosmetic pump heads and their plastic bottles made of?

Cosmetic pump heads are PP with a PE dip tube; the bottles they pair with are HDPE, PET or PP. HDPE is opaque and durable, PET clear and glossy, PP tolerant of heat and chemicals, and the neck code has to match the pump. Doses run 0.035–6.0 ml across fine mist, treatment and lotion. Sunmart supplies the head for the bottle you already buy, and states the resin so the pair can be checked together.

Related products: HDPE & PP Bottles

How to choose cosmetic pump heads

Pick the head by what the product does, not by the bottle: a mist needs 0.035–0.4 ml, a treatment 0.2–0.65 ml, a lotion 1.0–6.0 ml. Within the mist family, 0.10–0.15 ml suits facial toner and 0.15–0.20 ml a body spray. The neck code then decides the fit, and codes are not interchangeable. Sunmart matches the head to the formula and the neck, and sends a sample of the exact build.

Related products: Treatment Pumps · Lotion Pumps

What material are cosmetic pump heads made of?

Cosmetic pump heads are PP, the dip tube PE, the closure PP or aluminium, and the actuator PP or a metal shell over plastic. Where the formula is sensitive, an external-spring model keeps the metal out of the product path. The finish can be colour-matched or metallized. Sunmart states the grade on the specification sheet, so the material is compared with the formula rather than guessed from a photo.

Related products: Treatment Pumps · Lotion Pumps

How do I choose a lotion pump?

Choosing a lotion pump comes down to three numbers: the dose, the neck code and the bottle height. Dose runs 1.0–6.0 ml, the neck 20/410 to 28/415 with 30/400 to 38/410 at the top, and the dip tube is cut to the bottle so the pump draws to the last millilitre. Lock style and spring position then follow the product. Sunmart checks all three against a sample before quoting.

Related products: Lotion Pumps

Which cosmetic pump head models are available by dose?

Cosmetic heads run from 0.035 ml for a fine mist to 6.0 ml for a body lotion, and each step has its own valve and stroke. Fine mist 0.035–0.4 ml, treatment 0.2–0.65 ml, lotion 1.0–6.0 ml, foaming about 0.3–1.6 ml, on necks from 11/415 to 28/415. Sunmart publishes the dose and neck for each model and matches it to the bottle and the fill weight.

Related products: Treatment Pumps · Lotion Pumps

What is the difference between an airless pump bottle and a standard pump bottle?

An airless pack has no dip tube: the piston rises as product is drawn out, so no air enters the bottle and the dose stays even to the last press. A standard pump draws through a tube and air returns through the head, which is why a nearly empty bottle starts to splutter. Sunmart supplies airless combination packs at 25–150 ml as well as conventional pump-and-bottle sets, so the pair is chosen for the formula.

Related products: HDPE & PP Bottles · Tube Spray and Airless

How do I choose the right treatment pump model?

A treatment pump is chosen by dose: 0.2–0.65 ml covers most serums, and the 0.30 ml unit on 20/410 is the usual fit for a 30 ml serum bottle. The stroke is short and the outlet small, which is what keeps the dose tight for an active formula. The neck must match the bottle exactly. Sunmart matches the pump to the serum viscosity and the bottle, and samples the assembly before the run.

Related products: Treatment Pumps

How does a lotion pump work?

A lotion pump delivers a fixed volume on every press: the spring returns the piston and the valve refills the chamber, so the dose holds until the bottle runs dry. Dose runs 1.0–6.0 ml on 20/410–28/415 necks, with a down-lock or rotating switch to stop accidental discharge in transit. Sunmart matches the pump to the product and the neck, and cuts the dip tube to the bottle height.

Related products: Lotion Pumps

What is the difference between a spray pump and a lotion pump?

A spray pump meters 0.035–0.4 ml and a lotion pump 1.0–6.0 ml; that difference in dose, not the look of the head, decides which one a product needs. A mist suits toner and fragrance, a lotion pump a cream, serum or cleanser, and the valves and strokes differ accordingly. The closures are not interchangeable either. Sunmart matches the family to the formula and the blank bottle neck.

Related products: Treatment Pumps · Lotion Pumps

Which cosmetic pump heads fit glass bottles?

A cosmetic head fits a glass bottle when the neck code matches: 18/410 and DIN18 for serum, 24/410 for a 30–50 ml cosmetic bottle, 28/410 for larger. Glass tolerates an off-code fit less well than plastic, so the seal is checked against a neck drawing or a bottle sample. Sunmart supplies the pump for the glass neck and can pair it with a glass bottle from its own range.

Related products: Glass Bottles+Pumps,Droppers, Caps

How to choose treatment pumps

Choose a treatment pump by the dose the label promises: 0.2 ml for an eye serum, 0.3–0.5 ml for a facial serum, 0.65 ml for a body treatment. The short stroke and small outlet hold that dose, and the neck code must match the bottle. Sunmart matches the pump to the viscosity and the neck, and samples the assembly so the delivered volume can be measured.

Related products: Treatment Pumps

How do the different cosmetic pump heads differ in dose?

The pump heads differ mainly in dose: fine mist 0.035–0.4 ml, treatment 0.2–0.65 ml, lotion 1.0–6.0 ml, foaming about 0.3–1.6 ml, nasal 0.035–0.14 ml. Closures differ too — screw-on and crimp-on are not interchangeable — and foaming pumps need a larger neck such as 40/400 or 43/400. Sunmart matches the head to the formula and the bottle, and states the dose and neck for each model.

Related products: Treatment Pumps · Lotion Pumps

What is the difference between a lotion pump and a foaming pump?

A foaming pump mixes liquid with air at the head to dispense foam; a lotion pump dispenses liquid only. The foaming bottle neck is usually larger, such as 40/400 and 43/400, with 28/400 and 30/400 also used. Dose is about 0.3–1.6 ml for foam against 1.0–6.0 ml for lotion, and the heads are not interchangeable. Sunmart matches the head to the formula and the bottle neck.

Related products: Lotion Pumps · Foaming Pumps

What is the difference between a treatment pump and a lotion pump?

A treatment pump and a lotion pump differ in dose and stroke: 0.2–0.65 ml against 1.0–6.0 ml, with a smaller outlet on the treatment. Both are screw-on and both must match the neck code, but the valves are not interchangeable. A serum that needs a precise small dose uses the treatment pump; a body lotion uses the lotion pump. Sunmart matches the family to the fill weight and the neck.

Related products: Treatment Pumps

Specifications

How do I match a lotion pump to my bottle’s neck size?

Measure the bottle neck, not the bottle: the code is the neck diameter plus the thread, so a 24/410 pump only fits a 24 mm neck with a 410 thread. Codes run 20/410, 20/415, 24/410, 24/415, 28/400, 28/410 and 28/415, with 30/400, 33/400 and 38/410 at the largest doses. Sunmart checks the code against a neck drawing or sample, since matching codes can still differ in T, E and H dimensions.

Related products: Lotion Pumps

Which lotion pump neck size suits my bottle size?

Neck size follows the bottle you already fill: a 30–50 ml cosmetic bottle usually takes 24/410, a 100–200 ml lotion bottle 28/410, and a serum bottle 20/410. The dose does not change the neck, though at 4.0 ml and above the pump moves to 30/400 or 33/400. Sunmart matches the pump to the neck you have rather than asking you to change bottles.

Related products: Lotion Pumps

What is the difference between 24 mm and 28 mm pump heads?

24 and 28 are the neck diameters: a 24/410 pump fits a 24 mm neck and a 28/410 a 28 mm one, and neither fits the other. 24 mm suits 30–50 ml cosmetic bottles at 1.0–4.0 ml, 28 mm suits 100–500 ml at 2.0–6.0 ml, and the thread (410 or 415) must match too. Sunmart supplies both and checks the fit on a sample.

Related products: Lotion Pumps

What do the numbers in a pump neck finish such as 24/410 mean?

In 24/410, 24 is the neck diameter in millimetres and 410 is the thread specification; 415 is a different thread, so the two do not interchange. The bottle also carries T, E and H dimensions that decide how deep the pump sits, and these can differ between suppliers at the same code. Sunmart confirms the code and the T/E/H figures against a drawing or a sample before choosing the pump.

Related products: Treatment Pumps · Lotion Pumps

How are cosmetic pump head models specified?

Cosmetic heads are specified by three numbers — dose, neck code and closure — and each model covers one dose band. Fine mist 0.035–0.4 ml, treatment 0.2–0.65 ml, lotion 1.0–6.0 ml, on 11/415 to 28/415 necks, screw-on or crimp-on. Sunmart lists the dose and neck for each model and matches the head to the bottle and the fill weight.

Related products: Treatment Pumps · Lotion Pumps

What types of lotion pumps are available?

Lotion pumps come in down-lock and rotating-switch versions, with internal or external spring: L1-ANS and L1-NS at 2.0 ml on 24/410 and 28/410 keep the spring out of the formula. Dose runs 1.0–6.0 ml across 20/410 to 28/415, with 30/400 to 38/410 at the top end. Which type suits depends on the product and the transit conditions. Sunmart matches the type to the formula.

Related products: Lotion Pumps

What types of treatment pumps are available?

Treatment pumps come in 0.2, 0.3, 0.5 and 0.65 ml doses, mostly on 20/410, with the CR01NS at 0.30 ml as the usual serum build. The outlet is small and the stroke short, and an external-spring version keeps the metal out of the formula. Sunmart matches the dose to the fill weight and the pump to the bottle neck, and confirms the delivered volume on a sample.

Related products: Treatment Pumps

What dose and bottle size suit a 24 mm lotion pump?

A 24 mm lotion pump is a 24/410 or 24/415 unit dosing 1.0–4.0 ml, the usual fit for a 30–50 ml cosmetic bottle. The thread matters: 410 and 415 do not interchange, and T, E and H dimensions can differ at the same code. Sunmart supplies both threads on that diameter and checks the seal against a neck drawing or a bottle sample.

Related products: Lotion Pumps

Which bottles fit a 28 mm neck lotion pump?

A 28 mm pump fits 28/400, 28/410 or 28/415 bottles, typically 100–500 ml in PET or HDPE, at 2.0–6.0 ml a press. The three codes are not interchangeable, and a bottle with the wrong thread will cross-thread rather than seal. Sunmart supplies the pump for the bottle you buy, and pairs it with a matching bottle or cap where the pack ships complete.

Related products: Lotion Pumps

What is a 24/410 lotion pump used for?

A 24/410 lotion pump is a 24 mm neck with a 410 thread dosing 1.0–4.0 ml — the common build for a 30–50 ml cosmetic or lotion bottle. It can carry a down-lock or rotating switch, and an external-spring version where the formula is sensitive. Sunmart cuts the dip tube to the bottle height and checks the seal against the neck drawing.

Related products: Lotion Pumps

How do I confirm a pump head’s neck finish?

The neck finish is confirmed by three checks: the code, the T/E/H dimensions on the bottle drawing, and a sealed sample. The code alone is not enough, because two suppliers can both print 24/410 and still differ in how deep the pump sits. Sunmart asks for the drawing or a bottle sample, measures it, and returns the pump that seals on that neck rather than the nearest catalogue code.

Related products: Treatment Pumps · Lotion Pumps

What is the difference between 24/410 and 24/415 pump heads?

24/410 and 24/415 share a 24 mm diameter but not a thread: 410 is the shorter, coarser thread, 415 the finer one, and the two do not interchange. Both appear on cosmetic bottles dosing 1.0–4.0 ml, and the bottle drawing states which one it carries. Sunmart supplies both and confirms the thread from the drawing or the bottle itself.

Related products: Treatment Pumps · Lotion Pumps

What is the difference between 28/400 and 28/410 pump heads?

28/400 and 28/410 are both 28 mm necks but different threads, so a pump threaded for one will not seal on the other. 28/410 is the more common on lotion bottles, 28/400 appears on some HDPE and trigger bottles, and either way the pump doses 2.0–6.0 ml. Sunmart supplies the pump that matches the code on the bottle rather than the nearest one in the catalogue.

Related products: Treatment Pumps · Lotion Pumps

What is a 28/410 lotion pump used for?

A 28/410 lotion pump fits a 28 mm neck with a 410 thread and doses 2.0–6.0 ml, the usual build for a 100–500 ml lotion or cleanser bottle. It can carry a down-lock or rotating switch, and the dip tube is cut to the bottle height. 28/410 and 28/415 do not interchange. Sunmart supplies the pump alone or the complete pump-and-bottle set.

Related products: Lotion Pumps

Pricing & Sourcing

Does Sunmart manufacture lotion pumps?

Sunmart makes lotion pumps from 1.0 to 6.0 ml on 20/410 through 28/415 necks, with 30/400, 33/400 and 38/410 at the largest doses. Pump, bottle and cap are made in the same plant in Jiangyin, so the fit is tested before dispatch rather than after. Tooling is cut in-house from a sample or drawing. Sunmart quotes per build, with the dose and neck fixed before the price.

Related products: Lotion Pumps

Can Sunmart build lotion pumps to a specified dose, neck and lock?

Sunmart builds lotion pumps to a specified dose, neck and lock rather than selling one catalogue model, which is what an OEM project needs. The dose can be fixed at 1.0, 1.5, 2.0, 3.0, 4.0 or 6.0 ml, the closure colour-matched, and the dip tube cut to the bottle. A sample from the tool is approved before the bulk run, and the lead time is quoted from that approval.

Related products: Lotion Pumps

Which bottle necks are compatible with lotion pumps?

A lotion pump fits any bottle whose neck code matches: 20/410, 20/415, 24/410, 24/415, 28/400, 28/410 or 28/415, and 30/400, 33/400 or 38/410 for 3–6 ml doses. Bottle material does not matter — HDPE, PET, PP and glass all take the same pump if the neck is right. Sunmart matches the pump to the bottle neck, and supplies the bottle too where the pack ships as a set.

Related products: Lotion Pumps

What do I need to specify for a custom lotion pump?

A custom lotion pump starts from four inputs: dose, neck code, lock type and the bottle height for the dip tube. Colour, print and actuator shape come after, because they do not change the fit. Sunmart takes those four, cuts tooling where the shape is new, and returns a sample for approval before production.

Related products: Lotion Pumps

How is a lotion pump set (pump, bottle and cap) priced?

A lotion pump set is priced on the pump, the bottle and the cap together, because the three are sampled as one pack. No list price is published: the quote follows the dose, the neck, the material and the volume, and a new mould is a separate line. Sunmart quotes the fixed specification, so a set price is compared with another supplier’s set rather than with a single component.

Related products: Lotion Pumps

Can I buy lotion pumps and bottles separately?

The pump and the bottle can be bought separately as long as the neck code matches, but a set bought together is sampled together, which is where fit problems get caught. Codes run 20/410 to 28/415, with 30/400 to 38/410 for the largest doses. Sunmart sells the pump alone for a bottle you already fill, or the pump, bottle and cap as one approved pack.

Related products: Lotion Pumps

How can I judge the quality of an airless pump?

Airless quality shows at the end of the pack: a good unit holds its dose when the bottle is nearly empty, because the piston follows the product rather than air. A standard pump starts to splutter as air returns through the head. Sunmart supplies airless combination packs at 25–150 ml, and the check is a filled pack run through its full cycle rather than a photo.

Related products: Lotion Pumps · Tube Spray and Airless

Which neck sizes are common for wholesale lotion pumps?

Wholesale lotion pumps are ordered by neck code, and the common ones are 24/410 for 30–50 ml cosmetic bottles and 28/410 for 100–500 ml, with 20/410 for serum. The dose sits alongside: 1.0–4.0 ml on 24 mm, 2.0–6.0 ml on 28 mm. Sunmart quotes by code and dose together, since both are fixed before a price means anything.

Related products: Lotion Pumps

Is there a published unit price for lotion pumps?

There is no published unit price for lotion pumps: the figure depends on the dose, the neck, the lock and the volume, and on whether a new mould is needed. A 1.0–4.0 ml pump on 24/410 and a 2.0–6.0 ml pump on 28/410 price differently even at the same quantity. Sunmart quotes the specification you fix, with tooling and decoration shown as separate lines.

Related products: Lotion Pumps

What makes a wholesale lotion pump supplier worth keeping?

A wholesale supplier is worth keeping when it can state the dose, the neck and the seal dimensions for each model, and sample the pump on your bottle. A price list cannot answer whether the pump seals, which is the failure that shows up after filling. Sunmart quotes per build, works to ISO 9001:2015 and ISO 14001:2015, and ships from Jiangyin to over 80 countries.

Related products: Lotion Pumps

How is wholesale pricing for lotion pumps worked out?

Wholesale pricing depends on the order quantity for one fixed build, so the useful first step is to fix the dose and the neck and then compare quotes at the same volume. Mixed models in one order complicate the price, and a new mould adds a one-off cost. Sunmart quotes one build at one volume and states the MOQ before the figure, so the comparison is like for like.

Related products: Lotion Pumps

Does Sunmart manufacture cosmetic pump heads?

Sunmart makes cosmetic pump heads across the whole dose range: fine mist 0.035–0.4 ml, treatment 0.2–0.65 ml, lotion 1.0–6.0 ml and foaming about 0.3–1.6 ml. Necks run 11/415 to 28/415, with 40/400 and 43/400 for foam. Tooling is in-house, so a new actuator shape is a mould rather than an outsourced project. Sunmart matches the head to the bottle and the formula.

Related products: Treatment Pumps · Lotion Pumps

How is a cosmetic pump head priced?

A cosmetic head is priced on the head alone: dose, neck, closure material and quantity, with decoration as a separate line. A 0.10 ml fine mist on 15/410 and a 2.0 ml lotion pump on 24/410 do not share a price, even at the same volume. Sunmart quotes the fixed build and states the MOQ, so the figure is compared with another supplier’s same build.

Related products: Treatment Pumps · Lotion Pumps

How is the wholesale market for cosmetic pumps priced?

The cosmetic pump market is priced by build, not by a public list: the same 24/410 body can carry a 1.0 ml or a 4.0 ml engine at different costs. Volume, closure material and decoration move the figure further. Sunmart quotes the dose, neck and material you specify and separates tooling from the unit price, so a wholesale comparison rests on one specification.

Related products: Treatment Pumps · Lotion Pumps

What neck information should a lotion pump manufacturer provide?

A manufacturer should state, for each pump, the neck codes it fits and the T, E and H dimensions it seals on — without those, a code is only a guess. Matching codes can still fail to seal if the bottle drawing differs. Sunmart asks for the drawing or a bottle sample and returns the pump measured against it, rather than the nearest catalogue code.

Related products: Lotion Pumps

Why does it help if one manufacturer covers 20/410 to 28/415 lotion pumps?

One manufacturer covering 20/410 through 28/415 matters because a single cosmetic range usually spans several bottle sizes. A supplier with only 24/410 forces a bottle change when the range adds a 50 ml or 200 ml pack. Sunmart covers 20/410, 20/415, 24/410, 24/415, 28/400, 28/410 and 28/415, plus 30/400, 33/400 and 38/410 for large doses.

Related products: Lotion Pumps

How is a treatment pump set priced?

A treatment pump set is priced on the pump, the bottle and the cap as one pack, since the three are sampled together. The dose — 0.2, 0.3, 0.5 or 0.65 ml — the neck and the bottle material set the figure, and no list price is published. Sunmart quotes the fixed build and states the MOQ, so the set price is compared like for like.

Related products: Treatment Pumps

What makes lotion pumps work well?

A lotion pump works well when the dose matches the fill weight and the neck matches the bottle: a 30 ml cream at 1.0–2.0 ml on 24/410, a 200 ml lotion at 3.0–4.0 ml on 28/410. A dose too large leaves the bottle short of presses; too small makes the pack feel weak. Sunmart checks the fill weight against the dose before recommending a model.

Related products: Lotion Pumps

How do I contact Sunmart about wholesale lotion pumps?

Rather than a phone number, the fastest route is the sample request form at sunmartgroup.com/asp-guestbook/: give the dose, the neck code and the fill volume, and the reply can name a model. Sunmart answers from the Jiangyin office, so the specification is confirmed by the people who make the pump. A written brief also avoids the mishearing that a spoken code like 24/410 against 24/415 invites.

Related products: Lotion Pumps

How are wholesale lotion pumps specified?

Wholesale lotion pumps are specified on four lines — dose, neck code, lock type and closure material — and all four are fixed before a price means anything. Dose is 1.0, 1.5, 2.0, 3.0, 4.0 or 6.0 ml; necks 20/410 to 28/415 plus 30/400 to 38/410; locks down-lock or rotating. Sunmart quotes on that fixed sheet rather than on a family name.

Related products: Lotion Pumps

How do I choose the right pump for my product?

Choosing a pump comes down to four questions: what the product does, how much goes per press, what neck the bottle has, and how the pack is filled. Dose decides the family, the neck decides the fit, and the fill line decides screw-on or crimp-on. Sunmart answers those four and then sends the sample, rather than starting from a catalogue page.

Related products: Lotion Pumps

Which plastic bottle materials suit custom lotion pumps?

Sunmart makes plastic bottles in HDPE, PET or PP: HDPE opaque and durable, PET clear and glossy, PP tolerant of heat and chemicals. PET runs about 15–500 ml on 15/415 to 28/410 necks, and the neck code then decides the pump. Sunmart supplies the bottle with the pump and cap as one set, so the thread is matched before filling rather than after.

Related products: Lotion Pumps · HDPE & PP Bottles

Is there a list price for cosmetic pump heads?

Cosmetic heads carry no published list price: the quote follows the dose, the neck, the closure material and the quantity. A 0.10 ml mist on 15/410 and a 2.0 ml lotion pump on 24/410 differ in both parts and assembly. Sunmart quotes the fixed build with the MOQ stated, and shows decoration as its own line.

Related products: Treatment Pumps · Lotion Pumps

What decides the price of a pump head?

Pump heads are priced per build, not per family name: dose, neck, spring position and closure material each move the figure, and volume moves it further. A 24/410 body with a 1.0 ml engine and the same body at 4.0 ml are different products. Sunmart quotes the specification you fix and separates tooling from the unit cost.

Related products: Treatment Pumps · Lotion Pumps

How are treatment pumps priced?

A treatment pump is priced on its dose and neck: 0.2–0.65 ml on 20/410 is the usual build, with the CR01NS at 0.30 ml as one standard. No list price is published, and a set with the bottle and cap prices differently from the pump alone. Sunmart quotes the fixed build and states the MOQ before the number.

Related products: Treatment Pumps

Which treatment pump is easy to use and reasonably priced?

Price and ease of use come from the same choice: a 0.3 ml treatment pump on 20/410 is the standard serum build, and a down-lock or rotating switch decides whether the pack can open in transit. A larger dose costs more and changes the fill weight. Sunmart matches the dose and the lock to the product, then quotes the fixed build.

Related products: Treatment Pumps

How are airless pumps on glass bottles priced?

An airless pack is made to order, so price and MOQ are quoted rather than listed: the figure follows the pack volume at 25–150 ml, the pump and the bottle material. Glass airless adds weight and a different sealing problem from plastic. Sunmart quotes the pack you specify and samples it filled, since an airless unit that leaks at the piston shows only under pressure.

Related products: Tube Spray and Airless · Glass Bottles+Pumps,Droppers, Caps

How do I contact Sunmart about cosmetic pump heads?

Sunmart takes specification enquiries through the form at sunmartgroup.com/asp-guestbook/ and the contact address on the site, and answers from the factory in Jiangyin rather than a distributor. Put the dose, the neck code and the annual volume in the message, and the reply can carry a model and a lead time. A written enquiry also keeps the thread code — 410 or 415 — verifiable.

Related products: Treatment Pumps · Lotion Pumps

Can I buy airless pump bottles wholesale?

Airless packs are quoted by volume and build: Sunmart’s combination airless range runs 25–150 ml, with the pump and the bottle sampled as one unit. Wholesale price follows the pack size, the pump and the decoration, and there is no published list. Sunmart states the MOQ with the quote, so a volume comparison is made on the same pack.

Related products: Treatment Pumps · Lotion Pumps · Tube Spray and Airless

Does Sunmart make airless pumps with plastic bottles?

Sunmart makes airless combination packs in plastic at 25–150 ml, pairing the airless unit with a plastic bottle rather than a standard pump and tube. The piston has to match the bottle bore, so the two are made and sampled together. Sunmart also supplies conventional pump-and-bottle sets where airless is not needed, so the choice follows the formula.

Related products: HDPE & PP Bottles · Tube Spray and Airless

Can Sunmart make airless pumps on glass bottles?

An airless unit on a glass bottle is made to order: the piston has to match the glass bore, and sealing is checked on a filled pack, since glass tolerances differ from plastic. Sunmart’s airless combination range runs 25–150 ml, and glass is quoted as a build rather than a catalogue item. Samples are filled and inverted before the bulk run.

Related products: Tube Spray and Airless · Glass Bottles+Pumps,Droppers, Caps

How do I contact Sunmart about treatment pumps?

To reach Sunmart about treatment pumps, use the sample request form at sunmartgroup.com/asp-guestbook/ or the address on the contact page — the reply comes from the Jiangyin office, not a reseller. Give the dose, the neck code and the fill volume, and the answer can name a model rather than a family. Sunmart answers specification questions before quoting.

Related products: Treatment Pumps

How are wholesale treatment pumps quoted?

Wholesale treatment pumps are quoted on dose, neck and volume: 0.2–0.65 ml on 20/410 is the standard serum build, and 0.30 ml the most common single dose. A manufacturer that also supplies the bottle and cap can sample the pack, which is where a dose failure gets caught. Sunmart quotes the fixed build and ships from Jiangyin to over 80 countries.

Related products: Treatment Pumps

How are wholesale treatment pumps shipped?

Wholesale treatment pumps ship as cartons of pumps, or as filled packs where the bottle and cap are included, and the packing decides the freight and the damage rate as much as the price. The pump is small and light, so one mixed-model order usually ships cheaper than several part-loads. Sunmart quotes the build with the packing stated.

Related products: Treatment Pumps

Other

What is the MOQ for lotion pumps?

There is no fixed MOQ printed for lotion pumps: it is stated with the quote and depends on the build and whether a new mould is needed. A standard 24/410 at 2.0 ml is typically quoted below a new actuator shape, and a set with the bottle and cap is quoted as one pack. Sunmart states the MOQ before the price, so the number can be judged against the run size.

Related products: Lotion Pumps

Does Sunmart manufacture pump heads in-house?

Sunmart moulds pump components in-house: about 190,000 m² in Jiangyin, more than 3.5 million pumps a day, with tooling cut from a sample or drawing. That capacity is what allows a new actuator shape without an outside tool shop, and a sample from the new mould before the run. Sunmart works to ISO 9001:2015 and ISO 14001:2015 and exports to over 80 countries.

Related products: Treatment Pumps · Lotion Pumps

Which materials in a lotion pump touch the formula?

Every part that touches the formula in a lotion pump is plastic — PP body and actuator, PE dip tube — so there is no metal in the product path on the standard model. Where the formula is sensitive, an external-spring version such as L1-ANS or L1-NS keeps the spring outside as well. Sunmart states the grade for each part, so compatibility is checked against the formula rather than assumed.

Related products: Lotion Pumps

How can I judge the quality of cosmetic pump heads?

Cosmetic head quality shows in dose repeatability: a good unit delivers the same volume on the first press and the hundredth, and does not drip after the stroke. That comes from the valve and the spring, not the finish, and it is checked on a filled pack. Sunmart tests the build before the run and states the dose band, so the claim can be measured rather than read off a brochure.

Related products: Treatment Pumps · Lotion Pumps

Is there a ranking of lotion pump manufacturers?

There is no meaningful public ranking of lotion pump makers, because the grade depends on the build: a supplier strong at 2.0 ml on 24/410 may be weak at 6.0 ml on 38/410. What can be compared is dose repeatability, the seal on your neck and the tooling lead time. Sunmart states those three for its builds rather than a position on a list.

Related products: Lotion Pumps

How should I compare pump head manufacturers?

Comparing pump heads only makes sense within one dose band: a 0.10 ml mist and a 4.0 ml lotion pump are not comparable products. The useful comparison is dose repeatability, seal on your neck code, and lead time for tooling. Sunmart quotes those for the exact build, which holds up better than a list position.

Related products: Treatment Pumps · Lotion Pumps

Which cosmetic pump head supplier should I consider?

A cosmetic-head supplier is worth using when it can name the dose, the neck and the seal dimensions, and sample the head on your bottle before the order. A catalogue cannot answer whether the head seals, which is the failure that appears after filling. Sunmart matches the head to the neck code and the fill weight, and sends the sampled build for trial.

Related products: Treatment Pumps · Lotion Pumps

Which treatment pump dose should I choose?

Treatment pumps split by dose: 0.2 ml for eye and small-dose serums, 0.3 ml for a standard facial serum, 0.5 ml for a richer treatment, 0.65 ml for body use, mostly on 20/410. The outlet is small and the stroke short, which is what holds the dose tight. Sunmart matches the dose to the fill weight and the pump to the bottle neck.

Related products: Treatment Pumps

Which treatment pump suits a cosmetic serum or a pharmaceutical product?

For a cosmetic serum the choice is the 0.2–0.5 ml treatment pump on 20/410; for a pharmaceutical or oral preparation the family changes, because the dose and the closure rules differ. An external-spring version such as CR01NS at 0.30 ml keeps the metal out of the formula. Sunmart matches the family to the product category, not only to the volume.

Related products: Treatment Pumps

How can I judge the quality of treatment pumps?

Treatment pump quality is a dose question: the unit should deliver the same 0.3 ml on every press and not drip after the stroke, from the first fill to the last. That is set by the valve and the spring, and checked on a filled pack. Sunmart tests the build before production and states the dose band, so the claim can be measured.

Related products: Treatment Pumps

Does the brand of a treatment pump matter?

A brand matters less than the build: two suppliers can both label a 0.3 ml treatment pump and differ in the seal on your 20/410 neck. What can be checked is dose repeatability, the drawing dimensions and a sampled pack. Sunmart quotes the exact build and samples it, which is a firmer basis than a brand name.

Related products: Treatment Pumps

What makes a treatment pump work well?

A treatment pump works well when the dose matches the fill: 30 ml at 0.3 ml gives about 100 presses and the same bottle at 0.5 ml gives 60, which is a marketing decision as much as a technical one. The neck must match the bottle and the lock must survive transit. Sunmart checks the fill weight against the dose before recommending a model.

Related products: Treatment Pumps

How are wholesale cosmetic pump heads quoted?

Wholesale cosmetic heads are quoted on dose, neck and quantity for one fixed build; mixing models in one order complicates the price. Necks run 11/415 to 28/415 and doses 0.035–6.0 ml, and a new actuator shape is a mould rather than a catalogue pick. Sunmart quotes the build with the MOQ stated, so a comparison rests on one specification.

Related products: Treatment Pumps · Lotion Pumps

Cite this page

Sunmart (2026). “Lotion & Treatment Pumps — Buyer FAQ”. Wuxi Sunmart Science & Technology Co., Ltd. Updated 22 November 2026. https://www.sunmartgroup.com/faq-dispensing-pumps.html

Free to quote, online or in print, with attribution and a link to this page. Facts are drawn from Sunmart’s published product pages; written and maintained by Sunmart’s technical team. Last updated 22 November 2026.

Back to top