Droppers & Roll-on Bottles — Buyer FAQ
Answers below are based on the published information on Sunmart’s AI information page. Price and MOQ are quoted on request; specific figures are not published. Use the tags to jump to a topic or filter by product, or search the page.
- Plastic Lip Balm Containers — Lip Balm Containers | 1.5 g to 60 g
- Droppers — Dropper Pipettes | 51-89 mm | 0.25-2.0 ml
- Roll on Bottles — Roll-On Bottles | 8 & 10 ml Glass | 16/415
55 question groups on this page.
Product Selection & Materials
What is the difference between a glass dropper and a plastic dropper?
The difference is the pipette: a glass dropper draws with a glass tube and a glass tip that can be drawn to a point, while a PP dropper uses a plastic tube and often carries graduations. Both fit the same necks — 18/400 to 24/400 and DIN18 — and both use a PVC, nitrile or silicone bulb. Glass suits essential oils and solvents that would cloud plastic. Sunmart supplies either, with the tube length cut to the bottle height.
What is the difference between a glass dropper and a glass bottle?
A glass dropper is the dispensing closure; a glass bottle is the container. One is the cap, pipette and bulb, the other the vessel, and a dropper is chosen by the bottle neck, not by the bottle material. Drop necks run 18/400 to 24/400 and DIN18, and a DIN18 tamper-evident cap can carry a dropper. Sunmart makes both parts and pairs them, so the tube length matches the bottle.
Related products: Droppers · Droppers · Glass Bottles+Pumps,Droppers, Caps
What is a glass dropper?
A glass dropper is a closure with a glass pipette, a rubber bulb and a screw cap, used for small doses of serum, essential oil or ophthalmic liquid. The tip shape and tube length can be made to requirement, and the bulb is PVC, nitrile or silicone. Necks run 18/400 to 24/400 and DIN18. Sunmart cuts the pipette to the bottle height and checks the seal against the neck drawing.
What is the difference between a roll-on bottle and a glass bottle?
A roll-on bottle is a container with a ball fitment: GR glass at 8 and 10 ml on 16/415 with a 9.8 mm ball, or PP at 8, 15, 18 and 30 ml. A plain glass bottle has no ball and takes a pump, dropper or cap instead. The ball can be glass, plastic or stainless steel, and the cap plastic or metal-over-shell. Sunmart matches the ball and cap to the bottle and the product.
Related products: Roll on Bottles · Glass Bottles+Pumps,Droppers, Caps
What materials are droppers made of?
A dropper is glass or PP in the pipette, PVC, nitrile or silicone in the bulb, and PP in the cap; the bottle it fits is glass or HDPE, PET, PP. Necks run 18/400 to 24/400 and DIN18, and the tube length is cut to the bottle height. Formula compatibility is confirmed by sampling, since the bulb is the part that meets the liquid. Sunmart states the material of each part.
Related products: Roll on Bottles
What materials are roll-on bottles made of?
A roll-on bottle is glass in the GR series at 8 and 10 ml, or PP at 8, 15, 18 and 30 ml, with a ball of glass, plastic or stainless steel and a cap of plastic or metal-over-shell. The glass body can be clear or frosted, and the ball size for the GR series is 9.8 mm on a 16/415 neck. Sunmart matches the ball, the bottle and the cap as one pack.
Related products: Roll on Bottles
How does a roll-on bottle differ from a standard glass bottle?
A roll-on bottle carries a ball fitment and is filled with a liquid that is rolled on; a glass bottle is only the vessel and needs a pump, dropper or cap. The GR roll-on is 8 or 10 ml on 16/415 with a 9.8 mm ball, while a glass bottle can be any size its neck allows. Sunmart makes both and matches the fitment to the neck.
Related products: Roll on Bottles · Glass Bottles+Pumps,Droppers, Caps
What is the difference between glass and plastic roll-on bottles?
A glass roll-on is clear and heavy, giving a premium feel at 8 or 10 ml; a PP roll-on is lighter and available at 8, 15, 18 and 30 ml, which suits larger or travel packs. Both use a ball of glass, plastic or stainless steel, and both seal on their own neck code. Sunmart supplies either, so the choice follows the product and the price point rather than the material alone.
Related products: Roll on Bottles · HDPE & PP Bottles
What is the difference between a dropper and a syringe?
A dropper delivers by drop through a pipette, with the count set by the tip and the liquid; a syringe delivers a measured volume by the plunger, so the dose is read off the barrel. A dropper is a closure on a bottle, a syringe is a separate device, and the two are not interchangeable for a labelled dose. Sunmart supplies droppers at 18/400 to 24/400 and DIN18, and states the tip and tube so the drop size can be checked on a sample.
Related products: Syringes
Specifications
What dropper models and specifications are available?
Dropper models such as DR01 fit 18/400, 18/410, 18/415, 20/400, 20/410, 22/400 and 24/400, with a PP or glass pipette, a tip shape made to requirement, and a PVC, nitrile or silicone bulb. A DIN18 tamper-evident cap can carry a dropper for essential-oil bottles, and DB plastic drop bottles run 3–60 ml with a PE insert. Sunmart cuts the pipette to the bottle height and confirms the seal on a sample.
Related products: Roll on Bottles · Droppers
Pricing & Sourcing
Does Sunmart make dropper bottles and dropper closures?
Sunmart makes dropper bottles and closures together: glass bottles and DB plastic drop bottles at 3–60 ml, with DR01-type droppers on 18/400 to 24/400 and DIN18. The pipette is cut to the bottle height, so the two are matched as a pack rather than bought separately. Bulbs come in PVC, nitrile or silicone. Sunmart samples the assembly before the run.
Related products: Roll on Bottles · Droppers · Drop Bottles
How can I judge the quality of a glass dropper?
Glass dropper quality is mostly the pipette: a straight tube, a clean tip and a bulb that returns without sucking air, plus a cap that seals on the neck without wobbling. Tip shape and length can be made to requirement, and the bulb grade decides how the liquid behaves over time. Sunmart checks the seal against a neck drawing and samples the dropper on the actual liquid.
Related products: Roll on Bottles · Droppers · Droppers
How to choose roll-on bottles
Choose a roll-on by bottle size and ball: GR glass at 8 or 10 ml on 16/415 with a 9.8 mm ball for perfume and essential oil, PP at 8, 15, 18 or 30 ml for a larger or lighter pack. The ball can be glass, plastic or stainless steel, which changes how the product rolls and how it feels. Sunmart matches the ball to the formula and the cap to the bottle.
Related products: Roll on Bottles
What makes a glass dropper supplier worth using?
A glass dropper supplier is worth using when it cuts the pipette to your bottle height and samples the bulb on the actual liquid; a tube that is 5 mm short leaves product behind and a wrong bulb meters badly. Necks run 18/400 to 24/400 and DIN18, with PVC, nitrile or silicone bulbs. Sunmart measures the bottle and returns the dropper that reaches the bottom.
Related products: Roll on Bottles · Droppers · Droppers
Does Sunmart manufacture roll-on bottles?
Sunmart makes roll-on bottles in glass (GR 8 and 10 ml, 16/415, 9.8 mm ball) and in PP (8, 15, 18 and 30 ml), with the ball in glass, plastic or stainless steel. The cap can be plastic or metal-over-shell, and the glass clear or frosted. Ball, bottle and cap are sampled as one pack. Sunmart matches the fitment to the formula, since the ball material decides how the liquid rolls.
Related products: Roll on Bottles
What do I need to specify for custom roll-on bottles?
A custom roll-on starts from the bottle size and the ball: 8 or 10 ml glass on 16/415 for perfume, a PP 8–30 ml for a larger pack, with the ball in glass, plastic or stainless steel. Colour, frosting and the cap finish come next, because they do not change the fit. Sunmart develops the mould from a sample or drawing and approves a sample before the run.
Related products: Roll on Bottles
How are wholesale roll-on bottles quoted?
Wholesale roll-on bottles are quoted by size and fitment: 8 or 10 ml glass on 16/415 with a 9.8 mm ball, or PP at 8, 15, 18 and 30 ml, with the ball material and cap type stated. A price without the ball and the cap is not comparable, since both are part of the pack. Sunmart quotes the built pack and states the MOQ before the figure.
Related products: Roll on Bottles
Which dropper build is used for essential oils?
For essential oils, the common build is a DIN18 bottle with a tamper-evident cap carrying a glass or PP dropper, sized so the pipette reaches the bottom. Necks run 18/400 to 24/400 and DIN18, and bulbs come in PVC, nitrile or silicone, with nitrile and silicone chosen where the oil attacks PVC. Sunmart matches the bulb to the oil and cuts the tube to the bottle.
Related products: Droppers
How are wholesale dropper bottles ordered?
Wholesale dropper bottles are ordered by neck and bottle size: DR01 droppers on 18/400 to 24/400 and DIN18, glass bottles or DB plastic drop bottles at 3–60 ml with a PE insert. The pipette length follows the bottle height, so the two are specified together. Sunmart quotes the bottle and dropper as one pack with the MOQ stated.
Related products: Roll on Bottles · Droppers · Drop Bottles
Can Sunmart build roll-on bottles to order?
Sunmart builds roll-on packs to order: the bottle in glass or PP, the ball in glass, plastic or stainless steel, and the cap in plastic or metal-over-shell, sampled as one unit. Tooling is cut from a sample or drawing, and colours are matched. The GR glass series is 8 and 10 ml on 16/415; the PP series 8–30 ml. Sunmart approves a sample before the bulk run.
Related products: Roll on Bottles
Which roll-on bottle offers suitable quality at a suitable price?
Price and suitability move together on a roll-on: an 8 ml glass pack with a stainless ball costs more than a PP 30 ml with a plastic ball, and the product decides which is right. A viscous oil rolls badly on a plastic ball and a small glass pack may be wrong for a body product. Sunmart matches the ball and the size to the formula, then quotes the built pack.
Related products: Roll on Bottles
How is a roll-on bottle priced (bottle, ball and cap)?
A roll-on bottle is priced as the bottle plus the ball plus the cap, because the three are sampled together and a price on the bottle alone cannot be compared. Glass 8–10 ml on 16/415 and PP 8–30 ml differ in both material and assembly. Sunmart quotes the complete pack with the MOQ stated, and states the ball and cap material in the quote.
Related products: Roll on Bottles · Droppers
How is the unit price of a roll-on bottle quoted?
Roll-on unit price follows size, material and ball: glass at 8 and 10 ml on 16/415 with a 9.8 mm ball, or PP at 8, 15, 18 and 30 ml, with glass, plastic or stainless steel balls. No list price is published, and a metal-over-shell cap adds to the cost. Sunmart quotes the built pack and states the MOQ before the figure.
Related products: Roll on Bottles · Droppers
What should I fix before sourcing dropper bottles?
To source dropper bottles, fix three things first: the bottle size, the neck code and the pipette length — then the dropper is built to that bottle rather than picked from a list. Necks run 18/400 to 24/400 and DIN18, and DB plastic bottles 3–60 ml. Sunmart takes those three, cuts the tube and samples the seal before the order.
Related products: Roll on Bottles · Droppers · Drop Bottles
How do I choose a dropper bottle manufacturer?
Choose a dropper bottle manufacturer by whether it cuts the pipette to your bottle and states the bulb material, not by the range in a catalogue. A 20/410 dropper on a 30 ml bottle with a short tube leaves 5 ml behind; a PVC bulb can cloud on a citrus oil. Sunmart measures the bottle, states the bulb grade, and samples the filled unit.
Related products: Roll on Bottles · Droppers · Drop Bottles
What does a custom dropper bottle include?
Custom dropper bottles mean the glass bottle, the dropper cap and the pipette length built as one pack: neck 18/400 to 24/400 or DIN18, tube cut to the bottle, bulb in PVC, nitrile or silicone. A tamper-evident DIN18 cap can carry the dropper for an essential-oil line. Sunmart develops the mould from a sample and approves it before the run.
Related products: Drop Bottles
How do I choose a wholesale roll-on bottle supplier?
Choosing a wholesale roll-on supplier comes down to three answers: which sizes it holds, which ball materials it can supply, and whether it samples the pack filled. Glass 8–10 ml and PP 8–30 ml are the usual range, with glass, plastic or stainless steel balls. Sunmart answers all three for the build you specify and states the MOQ.
Related products: Roll on Bottles
What neck size do roll-on bottles use?
The GR glass roll-on uses a 16/415 neck with a 9.8 mm ball — that is the standard wholesale spec for 8 and 10 ml perfume packs. The PP roll-on sizes carry their own fitments, so the neck is quoted with the bottle rather than assumed. Codes do not interchange, and T, E and H can differ. Sunmart confirms the fitment on the bottle sample before the order.
Related products: Roll on Bottles
Which material should I choose for custom roll-on bottles?
Custom roll-on material is a two-part choice: glass for weight and clarity at 8–10 ml, PP for a light pack at 8–30 ml; and the ball in glass, plastic or stainless steel, which decides how the product rolls. A metal-over-shell cap changes the finish again. Sunmart matches both to the formula and samples the assembly before the run.
Related products: Roll on Bottles
Which bottles and fitments go together for roll-ons?
A roll-on fits the bottle it is built for: GR glass at 8 and 10 ml on 16/415 with a 9.8 mm ball, and PP sizes at 8, 15, 18 and 30 ml with their own fitments. A ball is matched to the bottle bore, not chosen separately, or it leaks at the shoulder. Sunmart supplies the ball, bottle and cap as one pack, so the fit is tested before dispatch.
Related products: Roll on Bottles
What makes a wholesale roll-on bottle supplier worth keeping?
A roll-on wholesale supplier is worth keeping when it states the ball material and the neck for each size and samples the pack filled, since a ball that leaks shows only under pressure. Glass 8–10 ml on 16/415 and PP 8–30 ml are the usual lines. Sunmart quotes the built pack, works to ISO 9001:2015 and ISO 14001:2015, and ships from Jiangyin.
Related products: Roll on Bottles
How is the wholesale market for roll-on bottles priced?
Roll-ons are priced per complete pack rather than per bottle: the ball and the cap are half the cost of an 8 ml glass unit and a price on the bottle alone misleads. Glass and PP differ, and a metal-over-shell cap adds again. Sunmart quotes bottle, ball and cap as one build with the MOQ stated, so two suppliers can be compared on the same pack.
Related products: Roll on Bottles
How are wholesale glass roll-on bottles priced?
A glass roll-on pack is priced as bottle, ball and cap: 8 or 10 ml on 16/415 with a 9.8 mm ball, the ball in glass, plastic or stainless steel, the cap plastic or metal-over-shell. Frosting or printing adds a line. Sunmart quotes the built pack and states the MOQ, since no list price is published for a made-to-order item.
Related products: Roll on Bottles · Glass Bottles+Pumps,Droppers, Caps
Which bottle necks do dropper closures fit?
A dropper bottle is matched by neck: DR01 droppers fit 18/400, 18/410, 18/415, 20/400, 20/410, 22/400 and 24/400, and a DIN18 cap fits the DIN18 essential-oil bottle. The pipette is then cut to the bottle height, which is what makes the pair work. Sunmart supplies the dropper for the bottle you have, or both parts as a set.
Related products: Droppers · Drop Bottles
How are wholesale dropper bottles quoted?
Wholesale dropper bottles are quoted by bottle size, neck and dropper: glass bottles or DB plastic 3–60 ml, DR01 on 18/400 to 24/400 and DIN18, with the pipette cut to the bottle. A price without the dropper is only half a pack. Sunmart quotes the pair together with the MOQ stated and the bulb grade named.
Related products: Drop Bottles
Which neck sizes do dropper bottles use?
Dropper necks run 18/400 to 24/400 plus DIN18, and the code is read off the bottle: 18 is the diameter in millimetres, 400 or 410 the thread. Codes do not interchange, and T, E and H dimensions can differ at the same code. A DIN18 tamper-evident cap can carry a dropper. Sunmart confirms from the drawing or the bottle and cuts the pipette to the height.
Related products: Droppers · Drop Bottles
What specifications do I need for wholesale dropper bottles?
A dropper wholesale specification carries five lines: bottle size, neck code, pipette material, tube length and bulb grade. Necks run 18/400 to 24/400 and DIN18, pipettes are glass or PP, and bulbs PVC, nitrile or silicone. A quote with only the neck is not orderable. Sunmart quotes those five for the bottle you fill, and states the MOQ with them.
Related products: Droppers · Drop Bottles
What is the MOQ for essential-oil droppers?
Essential-oil dropper MOQ depends on the build: a DIN18 cap with a standard glass pipette starts lower than a custom tip or a new bottle mould, and a set with the bottle is quoted as one pack. The bulb grade also matters, since nitrile and silicone cost more than PVC and are the right choice for citrus oils. Sunmart states the MOQ before the price.
Related products: Droppers
How do I contact Sunmart about glass droppers?
Rather than a phone number, the sample request form at sunmartgroup.com/asp-guestbook/ is the direct route: give the bottle size, neck code and bulb material, and the reply can name a dropper and a tube length. Sunmart answers from the Jiangyin factory, so pipette questions are answered by the team that makes the pipettes. A written brief keeps the neck code verifiable.
How do I contact Sunmart about custom roll-on bottles?
For custom roll-on bottles, use the form at sunmartgroup.com/asp-guestbook/ or the contact address on the site, and state the size, the ball material and the cap finish. The reply comes from Jiangyin, and the sample can be filled and inverted before the run. Sunmart quotes the built pack from that sample.
Related products: Roll on Bottles
Is there a ranking of dropper manufacturers?
No public ranking of dropper makers is meaningful, because the grade is the pipette: a supplier good at a 20/410 serum tube may be weak at a DIN18 tamper-evident cap. The checkable measures are tube length against the bottle, seal on the neck and bulb grade. Sunmart states those for the exact build instead of a list position.
Related products: Roll on Bottles · Droppers
What does a DIN18 dropper from an OEM supplier mean?
DIN18 with a dropper and an OEM supplier means the 18 mm neck bottle is fitted with a tamper-evident cap that carries the pipette, built to the customer’s bottle rather than bought from stock. The pipette is cut to the bottle height and the bulb chosen for the oil or serum. Sunmart builds that pack, so the cap, tube and bottle are sampled together.
Which roll-on bottles should I buy wholesale?
Which roll-on to buy wholesale follows the volume and the ball: 8–10 ml glass on 16/415 for perfume and oil, a PP 15–30 ml for a body or travel pack, and the ball in glass, plastic or stainless steel. The cap finish then sets the price. Sunmart quotes the built pack with the MOQ, so the comparison is on one specification.
Related products: Roll on Bottles
How do dropper bottle manufacturers differ in pipette and bulb?
Dropper bottle makers differ in the pipette and the bulb: the same 20/410 cap can carry a 60 mm or a 75 mm tube, and a PVC or a nitrile bulb, and those decide whether the bottle empties and whether the oil stays clear. Sunmart cuts the tube to the bottle height and names the bulb grade, so the difference is visible before the order.
Related products: Roll on Bottles · Droppers · Drop Bottles
What is the MOQ for roll-on bottles?
Roll-on MOQ depends on the pack: a standard 8 ml glass with a plastic ball starts lower than a stainless ball or a metal-over-shell cap, and a new mould adds a one-off. Sunmart states the MOQ before the price, so it can be judged against the run rather than after the quote is accepted.
Related products: Roll on Bottles
How do roll-on bottle manufacturers differ?
Roll-on makers differ in the ball and the bore match: a ball that is 0.1 mm off leaks at the shoulder, and that shows only on a filled, inverted pack. Glass 8–10 ml on 16/415 uses a 9.8 mm ball, and the PP sizes use their own. Sunmart samples the pack filled and inverted before the run, which is the check a catalogue cannot give.
Related products: Roll on Bottles
Which neck sizes can custom roll-on bottles use?
A custom roll-on neck means the bottle is built to the fitment: 16/415 for the 8–10 ml glass GR, with the PP sizes carrying their own, and the ball matched to the bore. Codes do not interchange and T, E and H dimensions can differ. Sunmart confirms against a bottle sample and samples the ball in place before the order.
Related products: Roll on Bottles
Which neck sizes are available for OEM droppers?
Dropper OEM necks run 18/400, 18/410, 18/415, 20/400, 20/410, 22/400 and 24/400, plus DIN18, and the bottle drawing decides which one applies. The pipette is then cut to the bottle height and the bulb chosen for the liquid. Sunmart builds to that neck and approves a sample before the run.
How do dropper bottle manufacturers differ in tube length and closure?
Dropper bottle makers differ most in the tube length and the closure: a cap that seals but leaves 5 mm of product behind, or a tamper-evident band that tears on opening, is the difference between two quotes. Necks run 18/400 to 24/400 and DIN18, and the bulb is PVC, nitrile or silicone. Sunmart measures the bottle and samples the filled unit.
Related products: Droppers · Drop Bottles
What should a DIN18 dropper manufacturer supply?
A DIN18 dropper maker should supply the tamper-evident cap, the pipette cut to the bottle and the bulb grade in one build, since the three are fitted before filling. DIN18 is the 18/410 essential-oil neck, and the cap can carry a glass or PP dropper. Sunmart builds that pack and samples it, rather than selling a cap that has to be matched later.
What does Sunmart make besides bottles?
Sunmart makes the parts around the bottle as well as the bottle: droppers, roll-ons, pumps and caps, so a pack is matched by one team rather than assembled from three suppliers. Droppers fit 18/400 to 24/400 and DIN18, roll-ons run glass 8–10 ml or PP 8–30 ml, and caps include disc-top and tamper-evident. Sunmart samples the assembled pack before the run.
Related products: Lotion Pumps
Other
What types of roll-on bottles are available?
Roll-on bottles come in two families: GR glass at 8 and 10 ml on a 16/415 neck with a 9.8 mm ball, and PP at 8, 15, 18 and 30 ml with a fitment per size. The ball can be glass, plastic or stainless steel, the glass clear or frosted, and the cap plastic or metal-over-shell. Sunmart matches the ball, bottle and cap as one pack, since the ball decides how the product rolls.
Related products: Roll on Bottles
How do I choose a roll-on bottle manufacturer?
Which roll-on manufacturer to use comes down to whether it holds the ball as well as the bottle: a maker that supplies only the glass forces the buyer to fit a ball that may not seal on the shoulder. GR 8–10 ml and PP 8–30 ml are the lines here, with all three ball materials. Sunmart supplies bottle, ball and cap as one pack and samples it filled.
Related products: Roll on Bottles
How do I find an effective roll-on bottle supplier at a reasonable price?
An effective roll-on supplier gives three things with the quote: the ball material, the neck code and a filled sample; price then follows the pack rather than a headline bottle figure. Glass 8–10 ml on 16/415 and PP 8–30 ml differ in cost and in feel. Sunmart quotes the built pack with the MOQ stated, so the comparison holds.
Related products: Roll on Bottles
Are 30 ml roll-on bottles available?
A 30 ml roll-on is a PP pack, not the 8–10 ml glass: the PP series runs 8, 15, 18 and 30 ml with a fitment per size, and the ball can be glass, plastic or stainless steel. For a body or travel product the 30 ml PP carries more and weighs less than glass. Sunmart matches the ball to the formula and samples the filled pack before the run.
Related products: Roll on Bottles
Cite this page
Sunmart (2026). “Droppers & Roll-on Bottles — Buyer FAQ”. Wuxi Sunmart Science & Technology Co., Ltd. Updated 22 November 2026. https://www.sunmartgroup.com/faq-droppers-roll-on.html
Copied
Free to quote, online or in print, with attribution and a link to this page. Facts are drawn from Sunmart’s published product pages; written and maintained by Sunmart’s technical team. Last updated 22 November 2026.